1byone Easy Chime OUKQH-0536 Instruction Manual - Page 7

Browse online or download pdf Instruction Manual for Accessories 1byone Easy Chime OUKQH-0536. 1byone Easy Chime OUKQH-0536 11 pages.

Print Page

Notes:

・The push button and receiver can connect with

a range up to 100m/300ft without any

obstacles.

・The push button's transmitting frequency is

433MHz and its range can be affected by metal

,walls, concretes, and interfering signals from

other electronic appliances with the same

frequency including televisions, radios, and

cookers.

・Please do not install the push button and

receiver near to the above mentioned

electronic appliances.

・Please test the operating range of the receiver

and push button in your home before

installation.

・Do not install the push button and receiver near

any source of naked flames such as lighted

candles.

・Do not expose the push button and receiver to

direct sunlight or high temperatures, otherwise

overheating may cause them irreparably

damaged.

- 11 -

c. Install the name plate:

Remove the transparent cover from the push

button.

Then write your name or room number on a

small paper (size: 2.3cm/0.9in x 2.0cm/0.8in).

Next, put the small paper into the transparent

cover and then put back the transparent cover

on the push button.

Note:

If you make the name plate by hand, be sure to

use a waterproof pen.

6. Trouble Shooting:

a. The receiver rings without the push button

being pressed.

The receiver may be matched on the same

frequency with nearby push buttons. You should

wipe the pairing and re-pair your push button(s).

b. There is no ring/LED flash when the push

button is pressed.

・Check whether the battery (CR2032) is inserted

into the push button.

- 12 -