Doza DKG-05D Operation Manual - Page 7

Browse online or download pdf Operation Manual for Measuring Instruments Doza DKG-05D. Doza DKG-05D 17 pages. Personal gamma radiation dosimeter

operational modes:
 
-
rate of
-
measurement of single
-
cumulated
6) ranges of measured values;
7) list of light and sound signals given at dosimeter operation (operator reference);
8) entrance IR window for PC connection via reading device to preset systemic alarm
thresholds for rate of
adjust dosimeter operation;
9) contacts of accumulator battery placed on the lower side of the casing.
1.4.2 The dosimeter provides operational individual monitoring of personnel and sound
and light alarming in case of the rate of
Operational individual monitoring of dose consumption for personnel of nuclear industry
enterprises and others concerned with operation of power reactor facilities, handling, processing,
and transportation of production containing radioactive materials. The dosimeters may be
applied in medicine for radiotherapy and diagnostics as well as used by environmental, sanitary,
and customs service.
ATTENTION! THE DEVICE SIDE WITHOUT CLIP HAS TO BE PLACED TO THE
BODY DIRECTION.
The dosimeter presumes the setting of two levels of
accidental presets, which exceeding is dosimeter user distinguished according to the character of
the sound signal. If the preventive
sound tone signals would occur, whereas the accidental
threshold are exceeded, tone signals have 250 ms duration each.
Alarm signal occurred in case of the exceeding any threshold would be automatically
terminated, if the new rate of
alarm preset. This function provides user to automatically stop the alarm signal, if he/she has left
the radiation field of dangerous (threshold) rate of
 
Н
10
and rate of
p
automatically re-switched to the mode of indication of the exceeded value.
Values of factory settings of sound and light alarming are as follows:
 
-
Н
10
preventive threshold
p
 
-
Н
10
accidental threshold
p
-
if measured
would be switched on to signalize
possible value of 42,9 Sv would be indicated;
-
preventive rate of
 
-
rate of
p
 
10
measurement;
p
 
Н
10
p
 
Н
10
measurement;
p
 
Н
10
and
p
Н
 
Н
10
p
 
 
10
measured current value is below the threshold value of the
p
 
 
10
measurements are always simultaneous and the display is
p
 
Н
10
value is above 42,9 Sv, the continuous alarm of 6 seconds duration
p
 
 
10
threshold which switches off the alarm is set 1 Sv/h;
p
 
10
accidental threshold is 12 Sv/h;
accumulated from the time of the last switching on;
 
 
10
, to read measurement results and to adjust/ re-
p
 
 
 
10
and
10
preset thresholds exceeding.
p
p
Н
preset is exceeded, doubled short (100 ms each)
Н
 
 
10
level. It should be reminded, that
p
15 mSv;
20 mSv;
 
Н
10
indication limit excess; in such case maximal
p
ФВКМ.412113.005РЭ
 
10
thresholds: preventive and
p
 
10
preset or rate of
p
 
 
10
p
7