AmpliVox B8001-96-01 User Manual - Page 8

Browse online or download pdf User Manual for Speaker System AmpliVox B8001-96-01. AmpliVox B8001-96-01 12 pages. Titan wireless battery powered pa system

WIRELESS SPEAKER TRANSMITTER (OPTIONALEQUIPMENT)
OPERATES ON DIFFERENT FREQUENCIES THAN AMPLIVOX WIRELESS MICROPHONE / RECEIVER
96 CH UHF WIRELESS SPEAKER TRANSMITTER
FEATURES
Channel Display (A) Frequency: 514 - 544 MHz
Select Buttons - Manual Channel Selection (B) Up / Down
Power / Volume Control (C)
Set Button (E)
Level Indicator (D)
AF - Audio Frequency Indicator (F) lights when transmitting
TX - Radio Frequency Indicator (G) lights when turned on
SETUP
• The transmitter has its own POWER / VOLUME Control (C). Turn Main Power On of the SW800-96, then turn transmit-
ter Power On (C). A Frequency Channel will appear in the Channel Display (A). To change, press the set button. Chan-
nel number will flash. Press Select Buttons (B) to select a channel. DO NOT SELECT SAME CHANNEL AS THE MI-
CROPHONES ARE SET TO. Channel number must match channel number on wireless receiver of the SC800-96
Speaker. EXAMPLE: Select Channel 50 on transmitter of SW800-96 and select Channel 50 on the speaker re-
ceiver of the SC800-96. Press set button again to lock channel. The AF LED will light when transmitting signal to re-
ceiver of the SC800-96. RX LED (F) of receiver (SC800-96) will light when channels are matched and receiving a signal.
OPERATE
• SW800-96: turn on main power / wireless microphone receiver / wireless speaker transmitter / wireless microphone.
• SC800-96: turn on main power / wireless speaker receiver.
• To start, set all volume controls of the wireless devices about half way between OFF and MAX. Test speaking into the
wireless microphone and adjust level of main volume controls first to the desired level. If you feel that you need to in-
crease sound level then adjust levels of the wireless devices.
SW800-96
G
SC800-96
8
A
B
C
F
E
D
Equipment shown in
pictures may look
different compared to
yours.