BOQU BQ-OIW User Manual - Page 10
Browse online or download pdf User Manual for Accessories BOQU BQ-OIW. BOQU BQ-OIW 11 pages. Online oil in water sensor
Print Page
BQ610-B Online Controller Operation manual
Trouble Shooting
Table 5-1 lists the symptoms, possible causes, and recommended solutions for
common problems encountered with the OIW sensor. If your symptom is not listed, or
if none of the solutions solves your problem, please contact us.
ERROR
POSSIBLE CAUSE
Power supply or wiring
Communication
abnormal
Interface or protocol
No change in
Cleaning brush failure
reading
Hardware or software
Sensor's window is
Measured value
dirty and worn
is too high, too
Low or
Sensor's brush is worn
instability
Calibration is required
Other errors
Check whether the power supply and wiring are correct
issues
according to the instruction
1. Use our SmartPC upper computer software to check
whether the communication is normal
issues
2. Check according to the supporting communication protocol
of the product
1. Check whether the brush is entangled by foreign matter, if
so, please remove the foreign matter;
2. Turn on the power again and observe whether the brush
rotates. If it cannot rotate or rotates abnormally, please contact
customer service
Check whether the power supply meets the requirements, to
avoid the low power supply can not drive the brush rotation
Contact customer service
issues
Clean sensor body, special light window table
Change brush
Perform user calibration
Contact customer service
Table 5-1
SOLUTION
10