BOQU BQ-OIW User Manual - Page 7
Browse online or download pdf User Manual for Accessories BOQU BQ-OIW. BOQU BQ-OIW 11 pages. Online oil in water sensor
Print Page
BQ610-B Online Controller Operation manual
Installation
Part List
Item
OIW Sensor
Cable
Brush
Assembly adapter
Sensor Installation
1) Wiring and power supply:
Do not use the sensor cable to pull the sensor! It is required to install sensor in a
•
secure and stable mounting bracket.
The female and male connector of sensor cable should be screwed tightly to avoid
•
moisture incursion
Important: Make sure power supply voltage is correct before turning the power
•
on.
Sensor installation:
It is recommended to install the sensor vertically with
•
Considering the basic principle of sensor optics, the distance between the end
•
face of the sensor optical window and the bottom of the container/device should
be more than 10cm!
In consideration of the fluctuation of water level, install the sensor below water
•
level of 30cm to submerge, and try to install it in the position where there are no
bubbles in the water;
The sensor must be securely installed to avoid damage caused by water flow and
•
other things.
Number
1
1
1
1
7
Note
10m
facing down.
probe