Amprobe ACD-20SW User Manual - Page 6

Browse online or download pdf User Manual for Measuring Instruments Amprobe ACD-20SW. Amprobe ACD-20SW 17 pages. Digital clamp meter

Print Page

SYMBOLS



Battery

Double Insulated

Alternating Current

Direct Current

Application around and

removal from hazardous live

conductors is permitted

Do not dispose of this product

as unsorted municipal waste

)

Canadian Standards Association (NRTL/C)

• The ACD-20SW, ACD-21SW and ACD-21SWC swivel Clamp meters conform

to EN61010-1:2001; EN61010- 2-032:2002; CAT III 600 V, class II; pollution

deg.2 and EN61326-1 (EMC compliance)

• This instrument is EN61010-1 certified for Installation Category III (600V).

It is recommended for use in primary supply lines, overhead lines and

cable systems and distribution level and fixed installations, as well as lesser

installations.

• Do not exceed the maximum overload limits per function (see

specifications) nor the limits marked on the instrument itself. Never apply

more than 600 V ac rms between the test lead and earth ground.

Warnings and Precautions

• Before and after hazardous voltage measurements, test the voltage

function on a known source such as line voltage to determine proper

meter functioning.

• Disconnect the test leads from the test points before changing meter

functions.

• Disconnected from the meter's test leads before measuring current.

Refer to the manual

Earth Ground

Fuse

Complies with EU directives

Conform to relevant

;

Australian standards

Audible tone