Amprobe MO-100 User Manual - Page 6

Browse online or download pdf User Manual for Measuring Instruments Amprobe MO-100. Amprobe MO-100 18 pages. Milliohm meter

Print Page

SYMBOLS

�

Caution ! Refer to the explanation in this Manual

�

Caution, Risk of Electric Shock

Please remove all the test leads before performing maintenance,

�

cleaning, battery replacement, fuse replacement, etc

�

Conforms to relevant Australian standards

�

Complies with European Directives

Do not dispose of this clamp meter as unsorted municipal waste.

Contact a qualified recycler for disposal.

WARNING!

�

Do not operate this instrument in the presence of gasoline, natural gas,

propane, or in other combustible atmospheres.

Refer to this manual before using the meter

• This instrument should only be used by a competent, suitably trained

person which fully understand the test & measurement procedure.

• Read the User's manual carefully and completely before using the

instrument. Fully understand the instructions before using this product.

Follow the instructions for every test. Take all the necessary precautions.

Do not exceed the limits of this instrument.

• The tested circuit must be de-energised and isolated before connections

are made to it.

• Do not use test leads, probes or crocodiles/aligators clips that are dirty,

damaged or have broken or cracked insulation. Such accessories should

be removed and repaired Immediately.

• Always disconnect the test leads before replacing any fuse or battery.

• Always replace the fuse with same type and rating; ensure that they are

correctly fitted on fuse terminals.

• Double check the switch settings and leads connections before

measuring. Make a sketch to ensure proper operation and principle of

measurement is correct and well understood.

• Do not touch any exposed wiring, connections or other "live" parts of

an electrical circuit. If in doubt, check the circuit first for voltage before

touching it.