Follett U300BR400A/W Installation Manual - Page 10
Browse online or download pdf Installation Manual for Beverage Dispenser Follett U300BR400A/W. Follett U300BR400A/W 12 pages. U300/ud300 series ice and beverage dispensers
Also for Follett U300BR400A/W: Operation Manual (17 pages)
Print Page
Installing remote icemaker(s)
Correct installation of remote icemaker(s) is critical to proper performance of
icemaker and dispenser. Refer to installation manual packed with icemaker for
!
important details on ice transport tube run, ventilation requirements for air-cooled
remote icemakers and other installation requirements. Failure to comply with
instructions will void warranty.
1. Position icemaker in desired location.
2. If ice transport tube will enter on tower side of dispenser, go to Step 5.
3. If ice transport tube will enter on side opposite tower, slide free end of ice transport tube(s) (without locator)
from inside of bin out through any of four prepared entry holes provided in dispenser sides, as shown.
4 Mate ice tube locator with appropriate slot in ice tube bracket and secure with two (2) thumbscrews provided.
5. Proceed with ice transport tube installation from dispenser to icemaker(s) in compliance with instructions
contained in Icemaker Installation Manual packed with icemaker.
Front view
Ice tube locator
(automatic load models only)
dispense
chute
Tower
side
ice tube
entry
auger
tube
1"
25 mm
ice tube bracket
drive shaft
Side view
Ice tube bracket
locator tabs
inserted in
ice tube
holes
9
ice tube
entry