Amprobe AMB-45 Instruction Manual - Page 3

Browse online or download pdf Instruction Manual for Test Equipment Amprobe AMB-45. Amprobe AMB-45 13 pages.

Print Page

SAFETY INFORMATION

Read the following safety information carefully before attempting

to operate or service the meter.

The circuit under test must be de-energized and isolated before

connections are made except for voltage measurement.

Circuit connections must not be touched during a test.

After insulation test, capacitance circuits must be allowed to

discharge before disconnecting the test leads.

To avoid damages to the instrument do not apply the signals,

which exceed the maximum limits shown in the technical

specification tables, to the meter.

Do not use the meter or test leads if they look damaged. Use

extreme caution when working around bare conductors or bus

bars.

Use the meter only as specified in this manual; otherwise, the

protection provided by the meter may be impaired.

Caution when working with voltages above 60V DC or 30 V AC

RMS. Such voltages pose a shock hazard.

Before taking resistance measurements or testing acoustic

continuity, disconnect circuit from main power supply and all loads

from the circuit.

Installation Categories III 600V

Pollution Degree 2

Altitude up to 2000 meters

Indoor use only

Relatively humidity 80% max.

Operation Temperature 0〜40℃

Maintenance & Cleaning:

Only qualified personnel should perform repairs or servicing not

covered in this manual.

Periodically wipe the case with a dry cloth. Do not use

abrasives or solvents on these instruments.

amb 45