FollowFocusGears.com Seamless Follow Focus Gear Ring Manual

Browse online or download pdf Manual for Camera Accessories FollowFocusGears.com Seamless Follow Focus Gear Ring. FollowFocusGears.com Seamless Follow Focus Gear Ring 2 pages.

Print Page

Thank you for choosing us! You have just purchased the

original

Seamless

Follow Focus Gear ring I Once installed,

it should give you a lifetime of trouble free service. Focus

gears should fit perfectly right out of the box. If

does not

fit as expected, let us know and we're here for full support.

Below are some tips that can help you make quick mods

on your own so you can get busy filming in the event a gear

is slightly off.

DISCLAIMER

Never force a non-fitting gear on to the focus ring of

your lens. If a gear is too tight for installation, let us

, know art(L~~-are

b~py

to-modify the gear for you.

TIGHT GEARS

SANDING Sanding is slow, but it works well if the gear is

only slightly too tight. 100 grit paper was perfect for us, but

just about any sand paper will work fine.

AIR HEATING This is the best method to get a tight gear on.

A heat gun works best. The cheap $20 heat guns on eBay

are perfect, but you can also potentially use a hair dryer.

Place the gear flat on a safe surface and simply heat the

inner surface of the gear as evenly as possible until the gear

is soft. Quickly slide the gear onto your focus ring. It should

fit perfectly as the gear cools. Be careful to install the gear

as quickly and evenly as possible for best result.