Carbonite CarboNET Setup

CarboNET

The CarboNET PMC translator allows you to connect

the control panel to the frame over ethernet. The

control panel connects to the CarboNET over the

standard serial link and then the CarboNET connects to

the frame over ethernet.

Note:

The CarboNET requires the frame to have a fixed IP

address so that it can connect to the frame. The frame must

either be set to a static IP address, or your DHCP server must

be set to always give the frame the same IP address.

Ports

Note:

The USB and ethernet 2 ports are not available at this

time. Only one PMC port can be used at a time.

PS1

Power

Power and Cabling

Important:

be CAT5e, or higher, Shielded Twisted Pair to a

maximum of 200m.

To Frame port

on control panel

PS1

PS2 MODE

2020 Ross Video Limited. Ross

, MiniME, and any related marks are trademarks or registered trademarks of Ross Video Limited. All other trademarks are the property of their respective companies. PATENTS ISSUED and PENDING. All rights reserved. No part

©

®

of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, mechanical, photocopying, recording or otherwise, without the prior written permission of Ross Video. While every precaution has been taken in the

preparation of this document, Ross Video assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein.

USB

Memory Card

Network

1

1 2 3 4

2

PS2 MODE

PMC link

ETHERNET

DIP

PMC

Status LED

Switches

and Reset

The cable to the control panel must

1

1 2 3 4

2

PMC link

ETHERNET

RESET

CarboNET Setup

Note:

It is recommended that you always connect the AC

Power Adapter to the device before connecting to Mains

Power.

Desk Mounting

CarboNET can be mounted under a desk using the

provided mounting bracket.

RESET

DIP Switches Control Panel DIP

Switches

The up position for the DIP switch is OFF.

DIP1 DIP2 DIP3 DIP4 Function

OFF OFF

OFF ON

Network

connection to

ON OFF

frame and

DashBoard

ON

ON

computer

User IP Settings

Force DHCP IP

Force Static IP (192.168.0.129)

reserved

OFF

reserved

ON

reserved

OFF Default Boot

ON Boot from memory card

Mounting

Bracket

4805DR-100-03