Carcam G-800 Installation & User Manual - Page 10

Browse online or download pdf Installation & User Manual for Dash Cameras Carcam G-800. Carcam G-800 13 pages.

Print Page

13. Sensor light

：The Sensor Light is a bank of LEDs around the front camera lens, designed

to offer assistance in night recording where there is poor ambient light. The options are; Off/

Open (on continuously) or Auto with the default setting of Auto.

14. Date Setting

: to set the date, enter the date menu and press OK button to open Date

&Time setting. Each setting will highlight in turn and use the Use & Down buttons to adjust

and press Mode button to store the setting and move to the next parameter. Press the OK

Button to finish and revert to the main System Menu.

15. Language：

There are 14 language options which are；Optional Simplified

Chinese/Traditional Chinese / English / Russian / German / Japanese / French / Portuguese /

Korean / Italian / Czech / Polish / Slovak / Spanish with the default setting of: English

16. Time Watermark (Date stamp)

：This is the option to have the date and time

displayed on recordings which is important in the event of an accident or incident witnessed

by the camera. The options are Open (on) or Close (off) and the default is on.

17. Factory Reset

： This is a digital electronic device and if at any point it functions

incorrectly you should use the Factory Reset button. The options are to Confirm or Cancel.

Note: where a Factory Reset is confirmed some of the aforementioned settings will have to

be re-entered.

18. Version.

This just refers to the firmware version in the camera.

PLAYBACK FUNCTIONS

The easiest and best way to check recordings is to connect the camera to a PC using the USB

cable supplied

The device will ask "Open USB storage devices and charging mode"，Up

button and down button to switch, press OK button to confirm.

The device should be identified

by the PC as a "Removal Disk" and you can click through to the DCIM Folders. DCIM A is the front

camera recordings and DCIM B is the rear camera recordings. You can also access the recorded files by

removing the Micro SD card and connecting this to a PC using the adapter peovided.

It is also possible to check recordings on the camera when in situ. To do this enter the

system to function setting. Remember, to access the menus the camera must stop recording

so press the OK button to stop recording.