FoMaKo RS-232 User Manual - Page 16
Browse online or download pdf User Manual for IP Camera FoMaKo RS-232. FoMaKo RS-232 16 pages. Co i or video conference camera
FAQ Handling
■
Display shows no image
1.
Check if the power supply is connected,
if the voltage is normal, if the power indicator
light on
2.
Repower on the camera to see if it can do
self-check normally.
3.
Check if the cables between camera and
terminal equipment are correct.
■
Sometimes there is no image
Check if the cables between camera and
terminal equipment are correct.
■
The camera can not be controlled by the
remote controller
1.
Replace a new battery
2.
Check if the camera is under normal working mode
3.
Check if the IR select of remote controller match the camera
■
Serial port can not be controlled
1、
Check if the camera protocol, address, baud rate are same
2、
Check if the control cable is connected normally
3、
Check if the control driver is installed successfully when controling by USB
RS- 232 Interface
Interface diagram
1
-15-
Function
No.
1
DTR
2
DSR
3
TXD
4
GND
5
RXD
6
GND
7
NC
8
NC