Fomei Digitalis Pro T400 TTL User Manual - Page 8
Browse online or download pdf User Manual for Camera Flash Fomei Digitalis Pro T400 TTL. Fomei Digitalis Pro T400 TTL 12 pages. Battery flash
Print Page•
LED modeling settings
o Press the button with symbol of a bulb on the HSS TTL controller to switch between 3
LED modeling light modes.
o
o
o
•
Multi stroboscopic flash
o Press and hold the „T" button on the HSS TTL controller for 2 seconds or longer for
multi-flash settings.
o Under the multi-flash mode, multiple flashes are fired continuously at a high speed.
o The flash output is manipulated by the number of flashes and flash frequency.
o To set the number of flashes, press the „T" button on the HSS TTL controller until the
display starts blinking. Set your preferred number of flashes using the +/- buttons.
o To set the flash frequency, press the „Hz" button on the HSS TTL controller until the
display starts blinking. Set your preferred frequency using the +/- buttons.
Number of flashes
Flash soft light mode: the modeling lamp output changes in accordance to
the output of the flash.
Modeling maximum output mode: the LED modeling is set at maximum
output capacity.
LED assist light mode: when the ambient light level is low, press the camera
shutter button halfway to emit the assist beam to autofocus.
Flash frequency