AirSep SeQual Workhorse Series Instruction Manual - Page 15
Browse online or download pdf Instruction Manual for Oxygen Equipment AirSep SeQual Workhorse Series. AirSep SeQual Workhorse Series 20 pages. Psa oxygen concentrator system
Print Page
6.0 Technical Data
6.1
SPECIFICATIONS
Performance Data
Product Flow
Oxygen Delivery Pressure
Product Concentration
Product Dew Point
Dimensions (W x D x H)
(nominal)
Weight (without cover)
Physical Connections
Product Gas Outlet
Ambient Operating Conditions
Control Power Requirements
(Single Phase)
Typical Power Consumption
Compressed Air
Environment
SCF (Standard cubic foot) gas measured at 1 atmosphere and 70°F / Nm
1
at 1 atmosphere and 0°C / LPM (Liters per minute) gas measured at 1 atmosphere and 21°C.
*All performance ratings based on an ambient temperature up to 100°F (38°C), up to 1,000 feet elevation, and
80% relative humidity.
Workhorse-8 Instruction Manual
Workhorse-8
1
Table 6.1:
Workhorse-8 Specifications
8 SCFH (.21 Nm
/hr or 3.8 LPM)
3
9 psig (62 kPa or 0.62 barg)
90% +3%/-5%
-100°F (-73°C)
14 x 18 x 14 in (36 x 46 x 36 cm)
(maximum dimensions without cover)
43 lb (20 kg)
∕
" FNPT
1
8
Locate the oxygen concentrator system in
a well-ventilated area that is protected from
weather elements and remains between
40°F (4°C) and 110ºF (43ºC) inside room or
operating enclosure; -20ºF (-29ºC) and 170ºF
(77ºC) in storage
120 V ~ ±10%, 60 Hz, 2.8 A
230 V ~ ±10%, 50 Hz, 1.8 A
230 V ~ ±10%, 60 Hz, 1.8 A
325 W
Pressure Relief Valve setting: 35 psig ±10%
•
Barometric Pressure Range: 28-31" of Hg
•
Ambient Oxygen Concentration: 20%
minimum
(Normal cubic meter) gas measured
3
AirSep Corporation
15