Amptone Lab XY MIDIPAD MINi User Manual - Page 3

Browse online or download pdf User Manual for Recording Equipment Amptone Lab XY MIDIPAD MINi. Amptone Lab XY MIDIPAD MINi 4 pages. For electric guitar

Print Page
SETUP AND USAGE
For a direct connection between XY MIDIpad mini and
the controlled device, you need to use a standard MIDI
cable (DIN5). You can connect it to any MIDI device which
reponds to its messages (see the MIDI table below).
HOLD MODE:
The pushbutton activates controller's Hold
mode. When hold mode is active, XY MIDIpad mini will
not be sending messages related with touch action.
ECONOMY MODE:
If you are concerned about power
consumption, you can use XY MIDIpad mini in economy
mode in which the controller does not use the LED for
visual effects. To activate or deactivate economy mode,
hold the XY MIDIpad mini pushbutton while starting it up.
Mode
Default devices
1
Korg KP2, KP3, KP3+,
Kaossilator Pro,
Kaossilator Pro+
2
DigiTech Whammy 4,
Whammy 5, Whammy
DT, Bass Whammy
3
MIDI hardware
synthesizers, MIDI
software synthesizers
4
MIDI drum machines,
MIDI drum samplers,
MIDI drum synthesizers
MIDI ch.
X-axis
1
MIDI CC12
(0-127)
2
MIDI CC11
(0-127)
3
Note On,
Note Off
MIDI notes range:
C4-B4; Velocity: 100
10
Note On,
Note Off
MIDI notes: bass drum, snare, open
hi-hat, crash; Velocity: 100
SWITCHING PROGRAMS:
switch between programs of the controlled device. To do
so, you need to twist the rotary encoder. XY MIDIpad mini
sends Program Change messages within 0-127 range.
XY MIDIpad mini offers 4 different
SWITCHING MODES:
controller modes, each sending different MIDI message
set (see the MIDI table below). To switch between
modes, press and hold the rotary encoder for 1 second.
Mode will be indicated by the number of red LED flashes.
COMPATIBILITY:
XY MIDIpad mini uses default settings
of devices used in modes 1 and 2. You may, however, need
to reset the device's MIDI channel. Please refer to this
device's manual to find out how to set the MIDI channel.
Y-axis
Touch
MIDI CC13
MIDI CC92
(0-127)
(0; 127)
MIDI CC10
MIDI CC0
(0-127)
(0; 127)
MIDI CC7
MIDI CC14
(0-127)
(0; 127)
MIDI CC15
(0; 127)
XY MIDIpad mini allows you to
Rotary encoder
Program Change
(0-127)
Program Change
(0-127)
Program Change
(0-127)
Program Change
(0-127)