fomex RX-FREE 7s Manual

Browse online or download pdf Manual for Camera Accessories fomex RX-FREE 7s. fomex RX-FREE 7s 2 pages. Power on/off & wireless flash trigger

Print Page
POWER ON/OFF & WIRELESS FLASH TRIGGER
Part Reference
Receiver
Connector to strobe
3.5mm socket
to 6.33mm
Jack Converter
3.5mm Sync Cord
Mini male Cable
Strobe Channel Button
AC 100V-200V
Transmitter Set up
1
1
Install a AA 1.5V battery into the transmitter.
2-1
Slide the transmitter into the hot shoe of your camera and tighten the lock wheel.
2-2
Use the included 2.5mm sync cord to connect the transmitter to a PC sync port of your camera.
※ Choose either 2-1 or 2-2 process depending on the type of camera.
Receiver Set up
2
1
1
Unplug the AC power cord from the studio strobe and plug it into the RX-Free 7s receiver.
Insert the power cord of the receiver into the AC power port of the strobe.
2
Plug provided 3.5mm sync cord to the receiver.
3
Insert connected 3.5mm sync cord to mini male cable, then to the sync port of strobe.
4
(If 6.3mm sync port used for your strobe, connect using jack converter provided.)
5
Connect mini female cable of the receiver to the mini jack port on the bottom of the strobe.
※ Follow the procedure ① > ② > ⑤ or ① > ② > ③ > ④ depending on strobe specification.
Strobe Light Volume Cord
Mini Female Cable
Status LED
Sync Channel
Power Button
2-1
3
Model
RX-FREE 7s
Sync Speed
Frequency
2.4GHz
Battery Transmitter
Channels
16
Receiver
AC 100V-220V
Max range
Up to 30 meters
Transmitter
Individual Strobe on/off button
Strobe Light Volume Control Button
2.5mm Sync Port
2-2
4
5
1/250 sec
1xAA 1.5V
TEST Button
Sync Channel
Battery Cover
All Strobes ON
All Strobes OFF