Amptone Lab Midi splitter User Manual - Page 3

Browse online or download pdf User Manual for Music Equipment Amptone Lab Midi splitter. Amptone Lab Midi splitter 4 pages. 1-in 4-out midi thru box

Print Page
USAGE
The device is switched on and off using a small toggle switch on top.
After switching it on, the LED will light red meaning it is ready to work.
MIDI Splitter passes through all incoming MIDI messages, including
NoteOn, NoteOff, CC, Clock, SySex to MIDI OUT ports. Every received
and passed through MIDI message will result in green LED blink.
It is possible to connect multiple MIDI Splitter units together in order
to pass incoming MIDI messages to more than 4 devices. This can be
achieved by connecting one of the MIDI Splitter's MIDI OUT ports into
MIDI IN port of another MIDI Splitter unit. Connecting 2 MIDI Splitters
will result in total number of 7 outputs, 3 MIDI Splitters will give 10
outputs etc.
RUBBER PADS AND VELCRO STRIPS
MIDI Splitter comes with 4 round adhesive backed rubber pads and
4 adhesive backed Velcro strips, which can be attached to the back
of your MIDI Splitter. Rubber pads will help MIDI Splitter stay firmly
on any surface and Velcro strips can be used to attach MIDI Spliter to
a pedalboard. Two types of Velcro strips are included, which means you
can use them to mount your MIDI Splitter on a desk or a floor.
WARRANTY
In the very unlikely event that your MIDI Splitter is not working
properly, we will be happy to repair or replace it for you. We are
providing warranty services for 2 years from the purchase date
for any malfunction that was not caused by the user.
If you experience any problems with your MIDI Splitter or you
have any questions regarding the device, please feel free to write
SAFETY INFORMATION
Water and moisture
Device should not be used near water or in a moist environment.
Care should be taken not to spill any liquids on the enclosure.
Power sources
Device should only be used with high quality power supplies
and batteries.
Servicing
The user should not attempt to service the device. All servicing
should be referred to qualified service personnel.