Advanced Bionics HARMONY Troubleshooting
Browse online or download pdf Troubleshooting for Hearing Aid Advanced Bionics HARMONY. Advanced Bionics HARMONY 4 pages. Hiresolution bionic ear system
Also for Advanced Bionics HARMONY: Quick Start Manual (20 pages), Manual (5 pages), Manual (5 pages)
Troubleshooting the Harmony
What do you need in a kit to troubleshoot the
Harmony?
Spare headpiece and cable
Spare PowerCel
Access to meaning of LED displays (see next page).
Contact numbers
It might also be useful to have a Dri-Aid kit in case the
processor gets wet.
A PowerCel charger will give you information as to whether the
PowerCel is charging correctly.
If there is a problem with the PowerCel charger try this link
pages 49 and 50
http://www.bionicear.com/userfiles/File/Harmony_Processor_Us
er_Guide_Rev_C.pdf
Listening earphones?
Advanced Bionics say that the LED will tell you anything you
need to know. If the LED indicates no problem and the user is
still complaining of problems, it is better to replace the
processor.
What if the processor gets wet?
Remove the PowerCel (battery) from the Harmony. Shake out any
excess water. Place the Harmony and headpiece in the Dri-Aid Kit
overnight. If no kit is available, leave to dry at room temperature.
Do not attempt to speed up the drying process by using a hairdryer
or other equipment as this can cause further damage.
If you have no success, contact the implant centre.
What do the lights on the LED display mean?