1byone O00QH-0761 Instruction Manual - Page 3

Browse online or download pdf Instruction Manual for Accessories 1byone O00QH-0761. 1byone O00QH-0761 7 pages.

Print Page

・ Reinsert the back cover, making sure it is

securely closed to ensure IP protection.

Note: If the performance of the push button

deteriorates or compeletely stops, the

battery might be exhausted. Please replace

with another 3V type CR2032 battery.

Safety Note:

For the receiver:

・Please plug it into a safe power outlet.

・Do not expose the receiver to water spray or

water drops and do not place liquid-filled

objects such as vases or opened drink

containers on or near the receiver and the

outlet.

・Unplug the receiver immediately if you sense

a burning smell or smoke. Have qualified

personnel check the receiver before using it

again.

・Unplug the receiver from the outlet if the

doorbell system is not to be used for an

extended period of time.

- 03 -

For the push button:

・The push button is powered by a CR2032

battery. When exhausted, replace it using the

same type and voltage battery.

・Always insert the battery using the correct

polarity to eliminate the danger of fire.

・Keep old and new batteries away from

children.

・Old batteries should be properly disposed

using safe environmental pracitices.

・Remove the batteries from the push button

if you do not intend to use the push button

for an extended period of time.

4. Operation:

A. Selecting the notification mode:

The doorbell receiver can notify when the

push button has been pressed by playing a

ringing sound, flashing an LED, or ringing and

flashing an LED at the same time. These are

referred to as Sound, Flash, and Sound+Flash

mode.

- 04 -