AMR 64 Operating Instructions Manual - Page 6

Browse online or download pdf Operating Instructions Manual for DJ Equipment AMR 64. AMR 64 7 pages.

Print Page
SPECIFICATIONS
Frequency Response
Equivalent Input Noise
Distortion
Input Channels
Input Impedance
Output Impedance (Channel Out)
Output Impedance (Insert Out)
Microphone Input Attenuator (Pad)
Gain
Maximum Input Level (Mic)
Maximum Input Level (Line)
Maximum Channel Output Level
Maximum Insert Output Level
Equalizer
High Frequency
Low Frequency
Mid Frequency
Output Section
Impedance
Maximum Output Level
Nominal Headroom
Noise
Bus
Nominal
Output Level Indicators
Auxiliary Send and Returns
Send Output Impedance
Send Maximum Output Level
Return Input Impedance
Return Maximum Input Level
Return Gain
Monitor Mixer Section
Input Impedance
Maximum Input Level
Gain
Monitor Output Section
Output Impedance
Nominal Operating Level
Maximum Output Level
Headphone Section
Output Impedance
Output Power
Output Connector
Power Requirements
Dimensions:
Weight:
+/- 2 dB 20 Hz - 20 kHz (all EQ flat position)
-130 dBV at 40 dB Gain
-127 dBV at 30 dB Gain
(Mic Input to Channel Output; EQ flat; Slider
maximum)
Less than .003% THD at 0 dB output
Mic - 50K ohms
Line-15K ohms
Tape - 10K ohms
Insert On - 22K ohms
100 ohms
100 ohrjis (tip)
20 dB (fixed)
3 dB to 60 dB (adjustable)
+11 dBV (LED clip level indicator)
+15 dBV (maximum level before clipping)
+21 dBV (LED clip level indicator)
+25 dBV (maximum level before clipping)
+14 dBV (LED clip level indicator)
+18 dBV (maximum level before clipping)
+18 dBV
+/- 15 dB at 10 kHz (shelving-type)
+/- 15 dB at 50 Hz (shelving-type)
+/- 15 dB at selected frequency (adjustable
from 200 Hz to 5 kHz)
100 ohms (L&R)
+18 dBV (L&R)
+18 dBV (reference: 0 dBV)
-96 dBV (all channel sliders down; auxiliary
return down)
-91 dBV (all channels at 30 dB Gain; EQ flat,
sliders up; auxiliary return down)
0 dB = -10 dBV (factory calibrated)
0 dB is indicated by the LED display having the
0 dB LED illuminated (internally adjustable
from -17 dBV to +9.5 dBV)
IK ohms
+18 dBV
10K ohms
+30 dBV
14 dB (maximum)
lOKohms
+30 dBV
14 dB (maximum)
100 ohms
-10 dBV
+18 dBV
8 ohms to 300 ohms
0.5 watts into 8 ohms
%" phone (ring/tip/sleeve)
120 VAC at 50/60 Hz at 25 watts
220 and 240 VAC at 50/60 Hz available upon
request
Meets UL and CSA electrical codes
17" W x 17.5" H x 2.5" D
(431 mm x 444 mm x 63 mm)
16 lbs. (7.2 kg)