Comelit Icona 6601W/BM Technical Manual - Page 14
Browse online or download pdf Technical Manual for Monitor Comelit Icona 6601W/BM. Comelit Icona 6601W/BM 17 pages. 2-wire door entry monitor
Also for Comelit Icona 6601W/BM: Technical Manual (20 pages), User Manual (7 pages), User Manual (18 pages)
Print Page
Other functions: button programming
1. To enter programming mode, set S2 DIP-switch 6 to ON.
» the LED
flashes
2. Refer to the table
"Basic configuration"
to the buttons you want to program appear, then set the S2 DIP-switches.
Example: For button 4= Self Activation (AI) and button 5 = Call to Secondary Switchboard (CCS), set S2 DIP-switches 1-2-
3-4 as specified in row M in the "Basic configuration" table.
3. Press and release the buttons involved in the change.
» Correct procedure indication: the LED
4. Exit programming mode by setting S2 DIP-switch 6 to OFF.
» LED
switches off
5. Set S2 DIP-switches 1-2-3-4 to ON.
Programming range
Take note of the S2, S1 settings and restore on completion of programming
Min. address
Max. address
Cancellation
Enable
Disable
When the procedure is complete, restore the initial DIP-switch combination.
14
to identify a DIP-switch combination in which the desired functions corresponding
flashes for a few seconds and a confirmation tone sounds.
1.
S2
S1
Set a code.
"Addressing
table" on page
17
S1
S2
1.
2 sec
2 sec
2.
OK prog:
KO prog:
x10
S2
S2
3.
OK prog:
x4
S2
KO prog:
x4
x10
4.