Comelit KSW3207LU User Manual - Page 10
Browse online or download pdf User Manual for Switch Comelit KSW3207LU. Comelit KSW3207LU 19 pages. Wireless intruder alarm control panel
Also for Comelit KSW3207LU: User Manual (12 pages)
Print Page
Consult event log
Use this function to consult the event log. The control panel can log up to 1024 events. New events are stored in the log as event 0000. Event 1023 becomes 1024
and is then deleted from the log.
To consult the log:
1.
Enter the user code (default 111111) using the alphanumeric keypad and press the down arrow.
2.
Enter the "Alarm" menu by pressing Enter/Confirm.
3.
Move on to the Event log menu using the navigation keypad and enter the menu by pressing Enter/Confirm.
»
The possible options are as follows:
•
Event memory: can be used to view the entire list of events.
•
Alarm memory: only shows alarm events for the most recent arming period.
»
The event type (activation or reset), the event description and the event date and time are shown first.
f
For more information, press the right-hand arrow on the navigation keypad; at this point all the other data will be shown.
To scroll through the log, use the up and down arrows on the navigation keypad. See below for a diagram illustrating navigation within the Event log.
f
R:Alarm:Burglary
09:40:26 02/01
Alarm:Burglary
08:36:26 02/01
Armed
07:09:50 02/01
»
Each event has applicable attributes:
EventQual (Event qualifier)
Event
Time
Date
Who
Area
Where
EventID
RxAck (Receipt acknowledgement)
When consulting the event log, the list of events can be filtered according to the main categories using buttons 0 to 7.
Button
Filter name
0
Reset filters
1
Alarms
2
Tampering
3
Exclusion
4
Battery / network faults
5
Other faults
6
Arming / Disarming
7
System operation
10
5A: Rear wind.
Ground floor
5A: Rear wind.
Ground floor
Mario
Ground floor
R: for Reset
Empty: for activations
Event description
Time at which the event occurred
Date on which the event occurred
User or device that generated the event
Area in which the event occurred
Device on which the event was generated
4-digit number identifying the event
RX for events that have been acknowledged by at least one recipient
NRX for events that have not been acknowledged
Event groups shown
Zone exclusion / activation
Device battery faults, control panel battery faults, control panel electricity mains fault
Total arming, partial arming, disarming, forced arming
System operations, technical programming
ID:0001
ID:0002
Control panel
ID:0003
All events
Alarms
Tampering
System anomalies