Comelit KSW3207LU User Manual - Page 13
Browse online or download pdf User Manual for Switch Comelit KSW3207LU. Comelit KSW3207LU 19 pages. Wireless intruder alarm control panel
Also for Comelit KSW3207LU: User Manual (12 pages)
Print Page
Users
This menu is used to create and change new user codes that will be able to use the alarm system. Up to 32 users with different profiles and authorisations
can be added. User 01 is already programmed by default with code 111111. The code and relevant settings can also be changed
for User 01.
• Users
Scroll through the list of users and select the one you want to work on:
• User 01
• User 02
• ...
• User 32
Users
Users
Once you have selected the user you will be able to use the following options:
•
Description: used to customise the user description.
•
Code: used to change the user code. Depending on the user profile assigned, some users can change their own code only, without being able to change
those associated with others. N.B.: 4-, 5- and 6-digit user codes can be used.
•
Profile: used to select the profile associated with the user. Profiles should be set by your installer. A user profile defines which procedures a user code is
authorised to carry out within the system.
•
Schedule: This menu is used to assign a user code to a timer for the schedule programmer. This allows the selected user code to be operative only during the
time bands set for the corresponding timer. Contact your installer for timer and time and programming.
•
Areas: Used to select in which areas the user is authorised to operate. A user may not, for example, be authorised to operate within the whole system but only
in a specific area.
•
Control devices: this menu can be used to set whether the user is authorised to operate the control panel keypad or not.
•
Delete user: used to remove the selected user.
• Add remote
this menu is used to acquire new RF remotes on the control panel. Once it has been acquired according to the procedure below, a user
will need to be assigned to the remote.
◊
Acquire: used to acquire a new remote.
Add remote
Acquire
1.
Select which position to pair the new remote with and confirm by pressing enter: the control panel now waits for an acquisition signal from the device.
2.
Press any of the remote keys once
»
The red LED flashes slowly while waiting for the control panel to confirm acquisition.
»
The LED displays the acquisition result and provides signal (RSSI) indication:
•
3 green flashes: stable connection
•
3 orange flashes: unstable connection
•
3 red flashes: device not acquired
• Edit/del remote
This menu is used to change the parameters for acquired remotes
•
Change user: used to change the user to which the remote is assigned.
•
Delete remote: used to delete the remote.
Remote
Remote 01
Users
User 01
Users
User 02
Sel.Remote nbr
02:Available
Sel.Remote nbr
03:Available
Remote 01
Change user
Remote 01
Delete remote
Remote 02
--------
Remote 03
--------
Assign user
User 02
Delete remote
01 ?
13