Comelit KSW3207LU User Manual - Page 9
Browse online or download pdf User Manual for Switch Comelit KSW3207LU. Comelit KSW3207LU 12 pages. Wireless intruder alarm control panel
Also for Comelit KSW3207LU: User Manual (19 pages)
Print Page
Using the radio control
1
3
The remote control has 4 buttons. All the buttons can be confi gured using the programming software on the control panel. By default button 1 is assigned to the
"total arming" command, button 2 to "disarm", button 3 to "part arm 1" and button 4 to "part arm 2".
Keypad lock/unlock:
Press and hold buttons 2 and 4 until the orange LED starts fl ashing rapidly. While it is fl ashing, press button 4 once.
»
The red LED will confi rm locking.
»
The green LED will confi rm unlocking.
LED indications:
•
Button pressed: Short red fl ash.
•
Command executed: two green fl ashes.
•
Command rejected: two red fl ashes.
•
Arming: Slow red fl ash.
•
Disarming: Slow green fl ash.
•
Low battery: Yellow fl ash preceding any other signal.
Adding new user codes
Other user codes can be added by entering the user menu and selecting the "Alarm > Users > Users" menu. Select a user from the list and press enter. This menu
can be used to enter a description and set a new code, for which confi rmation will be requested.
5
1. Button 1
2
2. Button 2
4
3. Button 3
4. Button 4
5. 3-Colour LED
9