Advanced Bionics Neptune Quick Start Manual - Page 2

Browse online or download pdf Quick Start Manual for Recording Equipment Advanced Bionics Neptune. Advanced Bionics Neptune 4 pages. Sound processor

Print Page
Powering Your Processor
to turn your processor ON, press and hold the Neptune 'on/off'
button for 1–2 seconds. You should notice the orange Led within
the button flashing to indicate battery charge.
to turn your processor OFF, press and hold the Neptune 'on/off'
button for 1–2 seconds. the orange Led will fade out to indicate
that the processor is powering down.
Replacing Your AAA Battery
1.
remove the battery cover.
2.
remove/replace aaa battery, noting proper orientation.
3.
replace the battery cover.
Understanding Neptune Processor Indicator Lights
Color
Behavior
Orange
Blinks at start-up
Solid
Blinks twice every three seconds
Fades out
Blinks once per second
Red
Blinks rapidly
(more than once per second)
Solid
Green
Flickers in response to loud inputs
Solid green
Blinks at start-up after battery status
and upon program change
Battery Cover
Programmable
No
•
4 quick blinks indicate that battery is fully
charged
•
2–3 quick blinks indicate that the battery is
sufficiently charged to power the system
•
1 quick blink indicates that the battery is nearly
depleted
•
No blinking indicates depleted battery. replace
with charged or new battery
Yes
Battery is almost depleted
Yes
Battery is depleted and cannot support stimulation
No
Sound processor is powering down
Yes
Loss of lock with the implant
No
Wrong implant connected
No
Sound processor error condition. Fully remove and
re-insert battery to reset processor
Yes
the sound processor and microphone are
responding to sound
No
indicates an empty program slot or monitor (∆)
position
No
•
1 blink indicates program one
•
2 blinks indicate program two
•
3 blinks indicate program three
On/Off
Button
+
Indication
_