COMEM DTI Instruction Manual - Page 9
Browse online or download pdf Instruction Manual for Measuring Instruments COMEM DTI. COMEM DTI 20 pages. Temperature monitoring unit
Print Page
Programming of the device
Selection of the number of active inputs
It is possible to select the number of activated inputs. It's possible to choose
between 3 and 4 inputs enabled; if there are 3 inputs enabled the T4 display
remain off.
Select 3 or 4 inputs with ← and → keys.
Confirm with ENTER.
Active inputs mode
HOLD mode deactivated
All inputs activated
Control ventilation
The FAN led will switch on indicating the programming of the ventilation control.
If 3 inputs are selected the following setting are available:
• ventilation control inhibited
• fan control active on 3 inputs
Select the configuration with ← and → keys.
Confirm with ENTER.
Fan mode (3 inputs)
Fan control inhibited
Fan control on 3 inputs
If 4 inputs are selected the following setting are available:
• ventilation control inhibited
• fan control active on 3 inputs
• control active only on fourth input
Select the configuration with ← and → keys.
Confirm with ENTER.
Fan mode (3 inputs)
Fan control inhibited
Fan control on 3 inputs
Fan control on 4 inputs
T1-T2 display
Ch
Ch
T1-T2 display
FAN
FAN
T1-T2 display
FAN
FAN
FAN
T3-T4 display
123
ALL
T3-T4 display
Off
ON
T3-T4 display
Off
ON
4
9