Amsberg WR1800P Instruction Manual - Page 4

Browse online or download pdf Instruction Manual for Extender Amsberg WR1800P. Amsberg WR1800P 6 pages. Mobile signal booster

Print Page

Signal Booster Unit

Select Location for Mobile Repeater Unit

• Choose a dry, cool, ventilated area. Avoid places with humidity, like the kitchen or the bathroom. Avoid areas like closets.

Avoid areas in direct sunlight, which can overheat the base unit.

• Select a central area. The aerial should be placed as close as possible to the center of where you want reception. The signal

from your repeater will broadcast in a circular manner with the basic whip aerial.

• Select a location that provides easy access to connect the cable from the outdoor antenna. You need to be able to wire the

cable from the outdoor antenna on the roof to the base unit inside. Ideally, you'll place the signal aerial near existing wiring

that you can use the thread for the new cable.

• In larger buildings, you may need to install more than one indoor signal aerial to blanket the whole building with a high signal.

Removable Hidden Mounting Bracket

Removable Bracket

Make sure reinstall screws on

repeater after taking off the

bracket

Slim Hook

Install on the Wall

Hang on repeater to the hook

Installing and Test the Mobile Repeater Unit

1) Place repeater in a dry, cool central location. The tops of a bookcase mounted on a wall or in a wiring closet are familiar places.

2) Locate a power source near the repeater. Plug in the adapter and connect the mains power into the mobile phone repeater.

The red power indicator should signal ON to indicate power.

3) Firmly connect the coaxial cable to your mobile repeater unit. Once the unit receives a signal, the No.1 signal indicator on the

base unit should show ON. If mobile phone repeater works correctly, the No.2 signal indicator should turn on. Also, LCD screen

on mobile phone repeater unit will show amplified signal strength.

4) Power down your phone and then power it back up. It will disconnect your phone from the current mobile mast. When your

phone starts back up, it will automatically connect to the strongest signal source in the area: your new mobile repeater.

5) Call someone who you know to test mobile phone signal. If everything set up correctly, you should have clear, crisp reception.

6) Secure any loose cables. Power cables should be wired along the walls or under the carpet. The coax cables should be at least

every two meters. Make sure no cables are hanging, swinging or loose.

Warnings

• Shut down the mains power switch. Do not install with live electricity.

• Your voltage has to be within 10% of the AC input of your repeater (240 V).

• Grounding recommended. Use at least a No. 8 AWG copper conductor.

• Avoid your gas lines when grounding your wires.

• Tampering with your mobile repeater will void your warranty.

• Static electricity discharge can damage inside parts.