DR. Heater DR-966 Owner's Manual - Page 10
Browse online or download pdf Owner's Manual for Heater DR. Heater DR-966. DR. Heater DR-966 13 pages. Wall / ceiling mount heater
Also for DR. Heater DR-966: Owner's Manual (16 pages)

OPERATING INSTRUCTIONS
WARNING -
used.
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR
ARC FLASH :
Apply appropriate personal protective equipment (PPE)
and follow safe electrical work
practices. See NFPA 70E.
A circuit breaker must be installed and serviced only by
qualified electrical personnel.
Always use a properly rated voltage sensing device to
confirm power is off.
The Select switch on the heater is only for function
selection. Use circuit breaker as power ON/OFF
device. The circuit breaker is to be installed by
certified electrican and shall be located in line of sight
from the heater location or shall be capable of being
locked in open position. Follow the operating
instruction to reduce the risk of fire, electric shock,
injury or death to persons.
Switch on the circuit breaker to turn on the heater.
Then turn the thermostat to the farthest clockwise position. The
fan should start and the unit begins heating the room,
is light.
After the room reaches comfort level, turn the
thermostat counterclockwise until the heater shuts off. The
heater will automatically cycle around this preset temperature.
To increase the temperature, turn the thermostat knob
clockwise. To lower the temperature, turn the thermostat
counterclockwise.
Press the switch to High or Low position for heat selection.
The heater must be properly installed before it is
and lamp
10