Dr. Mach LED 115 Instructions For Use Manual - Page 4

Browse online or download pdf Instructions For Use Manual for Medical Equipment Dr. Mach LED 115. Dr. Mach LED 115 15 pages. Spot light with led technology

Print Page

Mach LED 115

Extent of supply

 1x 5-footed plastic central base

 2x extension arms with blocking rollers

 2x extension arms with electrically conductive rollers

 1x extension arm with roller

 1x cam catch plate

 1x cheese head screw M8 with lock washer

 1x stand tube

 Lamp head with arm

 Mounting instructions/Instructions for use – lamp head and stand

2.1 Mounting the mobile stand

59060001

2. Mounting instructions

Edition 01

For mounting the stand proceed as follows:



Place the central base 1 onto the stand

tube 25 2. The stiffness is to ensure a

tight fit that is free from any movement.



Pre-mount the cam catch plate 3 (cams

point inwards), with the lock washer 4 and

cheese head screw M8 5, so that the ex-

tension arm 6 can still fit easily into the

central base. Insert the extension arm 6 in-

to the central base from above holding the

cam catch plate 3 against from the oppo-

site side.



Insert the other 4 extension arms 7-10 in

the sequence shown in the left figure into

the central base. The extension arms are

held by the cams of the cam catch plates.

Remark: Mount the two locking rollers 11

and 12, and the two electrically conductive

rollers 13 and 14 as shown in the figure (not

next to each other).



Tighten the catch plate with an Allen key

SW6 (approx. 15Nm).

The cams of the catch plate must mate with

the drill holes of the extension arms so that

every extension arm is tightly fitted to both

the central base and stand tube.

The cams also prevent the extension arms

from being pulled out.

02.08.2012 / Bak Page 4/15

Dr. Mach

Lamps and Engineering