Dr. Mach LED 6MC User Manual - Page 2

Browse online or download pdf User Manual for Medical Equipment Dr. Mach LED 6MC. Dr. Mach LED 6MC 5 pages.

Print Page

User manual - English

Congratulations on acquiring a new MACH LED 6MC operating

light.

Please read these Instructions for use very carefully.

1. Instructions for safe use

1.1

Intended user

The Mach LED 6MC is a Class I medical product and may only be

operated by trained medical staff.

1.2

Information and obligation of the user to check the product

Pay attention to the instructions for use when handling the lamp.

These Instructions for use are part of the product and must therefore

be stored in a place close to the product in order for the safety in-

structions and important information to be consulted at any time.

Make sure that the lamp is in satisfactory working order before every

use. If there is obvious damage, unusual operating conditions, etc.,

the lamp must not be used.

1.3

Availability of the instructions for use

These instructions for use and a detailed handbook with detailed in-

formation on how to deal with a fault, a list of accessoires and further

tips on how to use the light can be found online at the following link:

https://dr-mach.de/login/mach-led-6mc.html

1.4

Intended use / contra-indications

The Mach LED 6MC operating light is designed to illuminate an op-

erating site in medical facilities (e.g. in a laboratory, in hospitals or

doctor's practice) with focussed, low-glare, shadow-free light. It ena-

bles the user to perform a diagnosis or carry out medical interven-

tions. The Mach LED 6MC light is an operating light that is not fail-

safe when used as a single light. It is not intended for use in areas

where explosions are likely although it is permissible to use it in the

vicinity of HF surgical equipment.

Permanent illumination of the open human eye should be avoided

when illuminating the face area.

59361001

1.5

Technical data

Class of pro-

tection

IP protection

IP 54 (light body without camera preparation)

class

IP 53 (light body with camera preparation)

Input voltage

100-240 V AC, 50/60 Hz

(power supply)

Input voltage

24-30 V DC

(light body)

Power con-

Standard

sumption /

140.000 Lux

Current

66 W / 2,7 A max.

(without KV)

89 W / 3,3 A max.

(without KV, mit S)

65 W / 2,7 A max.

(withKV, without S)

75 W / 3,1 A max.

(with KV, with S)

75 W / 3,1 A max.

(with camera, without

84 W / 3,5 A max.

(with Kamera, with

Operating time

Continuous operation possible

(1)

Expected life

10 years

KV: camera preparation; S: shade management

At the end of the expected (designed) service life, the lamp must be serviced

more frequently for safe operation (see the manual for details).

1.6

Lighting technical data

Mach LED

6MC

Central light intensity

140,000 lux

(distance 1 m)

(optional

160,000 lux)

Light field diameter d10

180 mm

Light field diameter d50

103 mm

Residual light intensity

50%

(one shadower)

Residual light intensity

45%

(two shadowers)

58%

Residual light intensity

100%

(normed tube)

5 / 70

Residual light intensity

(normed tube, one shad-

ower)

Residual light intensity

(normed tube, two shad-

owers)

Illumination depth (20%)

Illumination depth (60%)

Radiation intensity in the

Optional

field

160.000 Lux

(distance 1 m)

75 W / 3,1 A max.

Max. radiation intensity

(without KV)

in the field

94 W / 3,9 A max.

(distance 0.69 m)

(without KV, mit S)

KV refers to the model with camera preparation, the lighting specifications

78 W / 3,2 A max.

have been determined for a light with a built-in camera.

(with KV, without

Without shade management system

With shade management system (optional)

87 W / 3,6 A max.

Mach LED 6MC with 160,000 lux (optional)

(with KV, with S)

87 W / 3,6 A max.

For a complete overview of technical and lighting specifications, refer

(with camera, with-

to the manual.

out S)

95 W / 3,9 A max.

1.7

Installation/Maintenance/Repair

(with Kamera, with

The lamp may only be installed, maintained or repaired by the man-

ufacturer or by specially trained staff. Maintenance must be carried

out at least every two years

1.8

Environmental conditions for operation

Ambient temperature:

Relative air humidity:

Air pressure.

1.9

Reporting obligations

Mach LED

6MC KV

Every serious incident which has occurred in connection with the

140,000 lux

product must be reported to the manufacturer and the competent au-

(optional

thority.

160,000 lux)

180 mm

2. Images on the device

103 mm

50%

41%

53%

100 %

Mach LED 6MC

50%

50 %

45%

41 %

58%

53 %

2000 mm

1680 mm

1050 mm

1010 mm

518 W/m

500 W/m

2 d

558 W/m

567 W/m

723 W/m

673 W/m

2 d

757 W/m

763 W/m

+5°C to +40°C

30% to 75% RH

700h Pat o 1060h Pa

This symbol indicates that the instructions

for use must be followed.

2023-01-30