Electrolux 241737900 Use And Care Manual - Page 12
Browse online or download pdf Use And Care Manual for Refrigerator Electrolux 241737900. Electrolux 241737900 36 pages. Electrolux side-by-side refrigerator use & care guide
Print Page
12
Controls & Settings
Responding to Alarms (Audible Tones & Indicator Lights)
Your refrigerator's control system can convey the following information through
audible tones and the alarm indicator lights.
Alarm
Indicator
Name
Light
On
(light is
off)
Steady
Green
Door
Flashing
Ajar
Green
High
Flashing
Temp
Amber
Power
Flashing
Failure
Amber
Using The Alarm Reset Button
You can disable or activate the alarm system by pressing and holding the Alarm
Reset button for three seconds. Use it, for example, to turn off audible tones and/
or flashing indicator lights.
CA
CA
UTION
UTION
CA
CAUTION
CA
UTION
UTION
!
The alarm system does not automatically reset if you disconnect and reconnect your
refrigerator's power cord. It can only be reactivated by pressing the Alarm Reset button.
Once you disable the alarm system, you must again press and hold the Alarm
Reset button for three more seconds to reset (activate) the alarm system. The On
indicator light remains off while the Freezer and Fresh Food compartments cool
toward the current temperature settings. When temperature settings are reached,
the On light displays green to indicate an active alarm system.
Audible
Tones
Condition
Alarm system is not active
while Freezer and Fresh
Food compartments are
cooling toward the current
temperature settings.
Alarm system is active.
Freezer or Fresh Food
door has been open for
over five minutes.
Freezer or Fresh Food
compartment has been too
warm (7.2° C or higher) for
over an hour.
A power outage was
detected.
How To Respond
If Freezer and Fresh Food
compartments do not match your
temperature settings in three hours,
expect the control system to signal
other conditions.
No response required.
Close door to disable and reset alarm.
Press Alarm Reset button to turn off
alarm.
Press Alarm Reset button to turn off
alarm and again to reset. Check if the
power failure lasted long enough to
affect stored food temperatures.