Electrolux Built-In Dishwasher Installation Instructions Manual - Page 26

Browse online or download pdf Installation Instructions Manual for Refrigerator Electrolux Built-In Dishwasher. Electrolux Built-In Dishwasher 28 pages. Built-in oven
Also for Electrolux Built-In Dishwasher: Use And Care Manual (36 pages), Use & Care Manual (44 pages), Use & Care Manual (28 pages), Use & Care Manual (40 pages), Use & Care Manual (27 pages), Use & Care Manual (12 pages), Use & Care Manual (22 pages), Tips And Recipes (36 pages), Operating Instructions Manual (18 pages), Ower's Manual (21 pages), Ower's Manual (13 pages), Owner's Manual (29 pages), User Manual (27 pages), Instruction Book (17 pages), Instruction Book (15 pages), Instrucion Book (18 pages), Instruction Book (27 pages), Instruction Book (18 pages), Service Manual (50 pages)

Print Page

Step 3: Mounting the Handle (Handle Provided with Dishwasher).

See Step 3B for Custom Handle Installation.

NOTE: Use these instructions ONLY if you are using the same handle provided with

the dishwasher. You will need to purchase two #10 - 32 bolts that are

1 inch long. These can be found at any local hardware store.

3.1 Remove the handle from the front panel by removing the two screws from the back of

the front panel. Discard the two large square washers.

3.2 Drill two 7/32" holes thru the custom panel per figure below. These holes are also

identified on the template.

3.3 Attach the handle to the custom panel with the two 1 inch bolts. See figure above.

NOTE: The large square washer should NOT be used with a custom panel.

Step 3B: Mounting Custom Handles

If using any type of custom handle it would be best to contact a professional cabinetmaker.

All fasteners MUST be flush with the back of the panel to ensure a proper fit.