Electrolux Built-In Dishwasher Service Manual - Page 33

Browse online or download pdf Service Manual for Refrigerator Electrolux Built-In Dishwasher. Electrolux Built-In Dishwasher 50 pages. Built-in oven
Also for Electrolux Built-In Dishwasher: Use And Care Manual (36 pages), Use & Care Manual (44 pages), Installation Instructions Manual (28 pages), Use & Care Manual (28 pages), Use & Care Manual (40 pages), Use & Care Manual (27 pages), Use & Care Manual (12 pages), Use & Care Manual (22 pages), Tips And Recipes (36 pages), Operating Instructions Manual (18 pages), Ower's Manual (21 pages), Ower's Manual (13 pages), Owner's Manual (29 pages), User Manual (27 pages), Instruction Book (17 pages), Instruction Book (15 pages), Instrucion Book (18 pages), Instruction Book (27 pages), Instruction Book (18 pages)

Print Page

3.7.2. REMOVING THE GRILL CUT-OFF MICROSWITCH AND THE "ON"

MICROSWITCH (electromechanical versions only)

Before removing the grill cut-off microswitch and the "ON" microswitch, remove the knobs.

Then, remove the front control panel.

Grill cut-off microswitch:

1. Remove the faston connector for the grill cut-off microswtch (note its position).

2. Remove the screws which secure the grill cut-off microswitch in position (see fig. 58).

"ON" microswitch:

1. Remove the grill cut-off control bracket (fig. 58, pos. 7).

2. Detach the wiring from the microswitch.

3. Detach the "ON" microswitch from the gas thermostat pin (fig. 58, pos. 2).

Fig. 58

1. PILOT LAMPS

2. "ON" MICROSWITCH

3. GRILL EXCLUSION

MICROSWITCH

4. FASTON CONNECTOR

FOR GRILL EXCLUSION

MICROSWITCH

5. CONTROL LEVER FOR

GRILL EXCLUSION

MICROSWITCH

6. GAS THERMOSTAT

CONTROL SPINDLE

7. CONTROL BRACKET

FOR GRILL EXCLUSION

MICROSWITCH

3.7.3. UPPER PANEL (fan and safety thermostat)

In both types of oven (electromechanical and electronic), the tangential cooling fan can be

accessed by removing the upper panel from the oven.

Proceed as follows to remove the tangential cooling fan:

1. Remove the screws which secure the upper panel in position.

2. Detach the wires from the tangential cooling fan.

3. Remove the screws which secure the tangential cooling fan (fig. 59, pos. 9, and fig. 60,

pos. 7).

4. Remove the tangential cooling fan.

SOI 04.04 FV

33/50

599 35 96-40