Bosch 100 Series Quick Start Manual - Page 5

Browse online or download pdf Quick Start Manual for Dishwasher Bosch 100 Series. Bosch 100 Series 7 pages. Reference guide
Also for Bosch 100 Series: Quick Manual (4 pages), Reference Manual (48 pages), Quick Start And Safety Manual (13 pages)

Print Page

START YOUR DISHWASHER

Press the On/Off button.

Select a cycle and option if desired.

Press Start.

ADD RINSE AID

This dishwasher is designed to be used

with rinse aid, which enhances drying

results and shine.

• Add rinse aid before first use and when

the Add Rinse Aid indicator light on the

control panel illuminates.

• Lift tab to open the rinse aid reservoir

and add liquid rinse aid into the oval

until it is full, avoiding air vent. Wipe up

any excess rinse aid that may puddle.

Tip: Remove lid of rinse aid bottle for easier pouring.

The amount of rinse aid dispensed can be set in 6 levels. Only change the

setting if streaks remain on the dishes (lower the amount), or if dishes are not

getting dry enough (increase the amount).

Setting

Factory setting Description

š-Intensive drying

š:‹‹/ off

š:‹‹-š:‹‚

§-Rinse Aid

§:‹†

§:‹†-§:‹‡

›-Beep at cycle

›:‹ƒ

end

›:‹‹-›:‹„

‚:‹‚ / on

‚ -Infolight

‚:‹‹-‚:‹‚

˜-Auto power off

˜:‹‹/ unit does

not shut off

˜:‹‹-˜:‹ƒ

automatically

ADJUSTING THE SETTINGS

Press the On/Off button. Hold down button A (see pages 6-7) and press

Start until the display shows š:‹

Release both buttons. The LED for the button A flashes and the digital

display shows the factory set value. Press A to choose the setting.

Press buttons B or C (up or down) to change the setting.

Press Start button to save the setting.

air

vent

Improved drying for glasses and

plastic, by increasing the tempera-

ture and length.

Dispenses the amount of rinse aid,

which affects drying (see above).

Adjust the sound level of the signal

beep at the end of the cycle. Or turn

off (›:‹‹).

Light projected on the floor to signal

active wash cycle. Set to on or off.

Unit turns itself off after cycle is com-

plete, either after 1 minute, ˜:‹‚ or

after 2 hours, ˜:‹ƒ .

x (x can be any number).

MAINTENANCE TIPS

Clean surfaces with damp cloth and mild soap.

NOTICE: Do not use abrasives or bleach based cleaners. Do not use stainless

steel cleaner on black stainless or anti-finger print surfaces.

Clean the filter 3-12 times a year, depending on usage.

Unscrew the Large Object Trap as illustrated and remove the entire filter

system.

Remove the micro-filter from the fine filter, rinse the filters under running

water clean with a soft brush.

Reinstall the filter system in reverse sequence, align arrows.

max

FREQUENTLY ASKED QUESTIONS

Why is food left on dishes?

It is possible the dishes do not have adequate clearance between them.

Also, be sure nothing is blocking spray arm and that the filter is clean. Select an

intensive cleaning cycle.

Why does the cycle run a long time?

1. Sensors in the dishwasher automatically increase the cycle time to ensure a

good wash when heavy soil is detected.

2. Incoming water may not be hot enough and dishwasher has to heat it.

Why is E:XX (X can be any number) displayed?

This is an error code. For example, E:22 indicates there is water in the sump

because the filter is blocked or needs cleaning. See the Use and Care Manual

for a list of error codes.

To access the full Use and Care Manual, go to: