Bosch 300 Series Operating Instructions Manual - Page 40

Browse online or download pdf Operating Instructions Manual for Dishwasher Bosch 300 Series. Bosch 300 Series 50 pages. Built-in wall ovens
Also for Bosch 300 Series: Instructions For Use Manual (40 pages), User Manual (21 pages), Installation Manual (6 pages), Installation Manual (36 pages), Installation Manual (32 pages), Use And Care Manual / Installation Instructions (40 pages), Quick Start And Safety Manual (7 pages), Installation Manual (28 pages), Quick Start Manual (7 pages), Use And Care Manual (32 pages), Quick Start And Safety Manual (7 pages), Service Manual (36 pages), Quick Start And Safety Manual (13 pages)

Print Page
Bosch 300 Series Operating Instructions Manual
en-us Troubleshooting
3

Troubleshooting

D ishwashers may occasionally
T r o u b l e s h o o t i n g
exhibit problems that are unrelated to
a malfunction of the dishwasher itself.
Problem
Cause
Error code
Supply hose kinked.
":‚‰ is lit.
Water supply turned off.
Water supply line is clogged.
Error code
Water in sump since sump filters
":ƒƒ is lit.
1b are dirty or blocked.
Error code
Drain line is clogged.
":ƒ... is lit.
Drain hose is kinked, clogged or
blocked.
Drain pump impeller (vanes) is
clogged or blocked.
Drain pump cover was loose.
Error code
Drain pump is blocked or pump
":Ġ is lit.
cover is loose.
Error code
Supply voltage too low (less than
":ƒˆ is lit.
98 volts).
A different
A technical fault has probably
error code is
occurred.
indicated on
the digital dis-
play.
(":‹‚ to
":„‹)
40
The following information may help
you with a dishwasher problem
without involving a repair
professional.
Action
Install supply hose without kinks.
Turn on the water supply.
Unclog water line.
Clean filters.
Unclog drain line.
Replace drain hose.
Remove drain pump cover, clean around
pump impeller and replace cover.
Lock drain pump cover into place in the
sump.
Clean drain pump and lock drain pump
cover into place in the sump.
Not a dishwasher fault; have the supply volt-
age and electrical installation checked.
Switch off dishwasher with the On/Off
switch (. After a short time restart the
dishwasher.
If the problem recurs, turn off the tap and
pull out the power supply plug.
Call customer service and mention the error
code.