Bosch 300 Series Use And Care Manual - Page 9

Browse online or download pdf Use And Care Manual for Dishwasher Bosch 300 Series. Bosch 300 Series 32 pages. Built-in wall ovens
Also for Bosch 300 Series: Instructions For Use Manual (40 pages), User Manual (21 pages), Installation Manual (6 pages), Installation Manual (36 pages), Installation Manual (32 pages), Use And Care Manual / Installation Instructions (40 pages), Operating Instructions Manual (50 pages), Quick Start And Safety Manual (7 pages), Installation Manual (28 pages), Quick Start Manual (7 pages), Quick Start And Safety Manual (7 pages), Service Manual (36 pages), Quick Start And Safety Manual (13 pages)

Print Page
Bosch 300 Series Use And Care Manual
Changing lamps
WARNING
RISK OF ELECTRIC SHOCK
When changing the lamps, the lamp socket contacts
are live. Before replacing the lamp, unplug the
appliance or switch off the circuit breaker in the fuse box.
Turn off the range hood.
To avoid damage or decreasing the life of the new lamp,
do not touch lamp with bare fingers. Replace lamp, using
tissue or wearing cotton gloves to handle lamp.
If new lamps do not operate, make sure the lamps are inser-
ted correctly before calling service.

Customer service

Our customer service department is there for you if your
appliance requires repair.
When calling, please give the Product Number (P-No.)
and the Serial Number (S-No.). The identification plate
listing the numbers can be found inside the appliance
(remove metal grease filter to find it).
So that you don't have to search for them when you need
them, you can enter your appliance information and the
customer service number here.
P-No.
Customer service O
Please note that a service visit to teach you to operate the

Accessories

(not included in the delivery)
Accessories
Recirculation module
Charcoal filter
Flue duct
S-No.
Material number
HCREC5UC
HCIFILTUC
HCPEXT5UC
1. Disconnect power.
2. Push up on the lens and turn it
counterclockwise.
3. Remove the lamp and replace it
with a 120-volt, 6.5 W maximum
LED lamp with a GU10 base. Turn
it clockwise to lock it into place.
4. Repeat steps 2-3 for the other
lamps if needed.
5. Reconnect power.
appliance is not covered by the warranty.
Please find the contact data of all countries in the
enclosed customer service list.
To book service or for product advice
US 800 944 2904
toll-free
Page 9