Bosch 6 Series Information For Use - Page 14

Print Page

en Disposal

Fault

⁠ ⁠

⁠ ⁠ ⁠ ⁠ ⁠ / ⁠ ⁠ ⁠ ⁠ ⁠

⁠ ⁠ ⁠ ⁠

⁠ ⁠

15.3 Normal noises from your appliance

An induction hob may sometimes cause noises or vi-

brations, such as buzzing, crackling, hissing noises, fan

noises or rhythmic noises.

16 Disposal

16.1 Disposing of old appliance

Valuable raw materials can be reused by recycling.

Unplug the appliance from the mains.

Cut through the power cord.

Dispose of the appliance in an environmentally

friendly manner.

Information about current disposal methods are

available from your specialist dealer or local author-

ity.

17 Customer Service

Function-relevant genuine spare parts according to the

corresponding Ecodesign Order can be obtained from

Customer Service for a period of at least 10 years from

the date on which your appliance was placed on the

market within the European Economic Area.

Note: Under the terms of the manufacturer's warranty

the use of Customer Service is free of charge.

Detailed information on the warranty period and terms

of warranty in your country is available from our after-

sales service, your retailer or on our website.

If you contact Customer Service, you will require the

product number (E-Nr.) and the production number

(FD) of your appliance.

The contact details for Customer Service can be found

in the enclosed Customer Service directory or on our

website.

18 Test dishes

These recommended settings are intended for test in-

stitutes to facilitate the testing of our appliances. The

tests were carried out using our cookware sets for in-

duction hobs. If required, these accessory sets can be

Cause and troubleshooting

The cooking zone has been operating continuously for an extended period.

Individual safety switch-off is switched on. Touch any button to switch off the display so

▶

that you can set the cooking zone again.

The operating voltage is incorrect and outside of the normal operating range.

Contact your energy supplier.

▶

The hob is not connected correctly.

Disconnect the hob from the mains. Connect the hob in accordance with the circuit dia-

▶

gram.

Demo mode is activated.

Disconnect the hob from the mains. Wait for 30 seconds and connect the hob. Touch

▶

any sensor in the next three minutes. Demo mode is deactivated.

This appliance is labelled in accord-

ance with European Directive

2012/19/EU concerning used elec-

trical and electronic appliances

(waste electrical and electronic equip-

ment - WEEE).

The guideline determines the frame-

work for the return and recycling of

used appliances as applicable

throughout the EU.

17.1 Product number (E-Nr.) and production

number (FD)

You can find the product number (E-Nr.) and the pro-

duction number (FD) on the appliance's rating plate.

The rating plate can be found:

¡ on the appliance certificate.

¡ on the lower section of the hob.

The product number (E no.) can also be found on the

glass ceramic. You can also display the customer ser-

vice index (KI) and the production number (FD) in the

basic settings. → Page 11

Make a note of your appliance's details and the Cus-

tomer Service telephone number to find them again

quickly.