Bosch ASCENTA SHX6AP Use And Care Manual - Page 17
Browse online or download pdf Use And Care Manual for Dishwasher Bosch ASCENTA SHX6AP. Bosch ASCENTA SHX6AP 21 pages. Bosch ascenta models dishwashers use & care manual
Also for Bosch ASCENTA SHX6AP: Use And Care Manual (21 pages), Use & Care Manual (26 pages)
Print Page
Self Help
Dishwashers may occasionally exhibit problems that are unrelated to a malfunction
of the dishwasher itself. The following
information
may help you with a dishwasher problem without
involving a repair professional.
Problem
Dishwasher
does not start
Dishwasher beeping (end of cycle
signal)
Display does not illuminate or
console lights are not on
Dishwasher
seems to run a
long time
Dishes aren't getting clean
enough
Cause
1.
Door may not be properly latched.
2.
Unit may not be turned on.
3.
Unit not reset or previous cycle not
completed.
4.
Delay start engaged.
5.
Interruption
of electrical power supply
to dishwasher or blown fuse.
6.
Child lock activated (select models).
7.
The door may have been closed with-
out first selecting a cycle.
8.
Water supply may not be turned on.
Default
factory
settings
alert
the customer
that
the cycle
has completed
by beeping.
This
feature
can be deactivated
if so de-
sired.
1.
A fuse may have been blown or circuit
breaker tripped.
2.
Door not closed or latched.
Note: For models
with
controls
on the top
portion
of the door, the display
only illumi-
nates when the door is opened
and controls
are visible.
1.
Incoming
water
is not warm
enough.
2.
Cycle time
can vary due to soil and wa-
ter conditions.
3.
Rinse agent
dispenser
is empty.
4.
Dishwasher
connected
to cold
water
supply.
Note: Refer to "Cycle Chart Data" section in
this manual for typical cycle length.
1.
Spray arm movement is obstructed.
2.
Spray arm nozzles clogged.
3.
Improper use of detergents.
4.
Filters could be clogged.
5.
Dishes are nested or loaded too close
together.
6.
Selected wash cycle is not suitable for
food soil condtions.
Action
1.
Shut the door completely.
2.
Pressthe main power switch to turn unit on.
3.
To reset, refer to "Canceling or changing the
cycle" section in this manual.
4.
To reset, refer to "Delay Start" section in this
manual.
5.
Check circuit breaker.
6.
Deactivate the child lock. Refer to "Child Lock"
section in this manual if applicable.
7.
Select a cycle and close the door.
8.
Check and turn on water supply.
To adjust
the volume
or deactivate,
refer to "Cycle
Completion
Signal" section
in this manual.
1.
Check the fuse or circuit breaker box and re-
place the fuse or reset the breaker if neces-
sary.
2.
Ensure that door is properly latched and com-
pletely closed.
1.
Before starting
a cycle, run hot water faucet
at
the sink nearest
to the dishwasher.
2.
Sensors
in the dishwasher
automatically
in-
crease the cycle time
to ensure
a good
wash
when
heavy soil is detected.
3.
Add rinse agent.
4.
Verify
dishwasher
is connected
to hot water
supply
plumbing.
1.
Ensure that
spray
arm movement
is not
blocked by hand rotating spray arms.
2.
Remove the spray arms and clean according to
"ChecklClean the Spray Arm Nozzles" in Care
and Maintenance section of this manual.
3.
Increase or decrease detergent depending
on
the water hardness. Refer to Table under "Add-
ing Detergent and Rinse Agent".
4.
Clean the filter. Refer to "ChecklClean the Fil-
ter System" under Care and Maintenance sec-
tion of this manual.
5.
Rearrangeload suchthatwaterspraycan
reach
all items in the dishwasher. See also "Prepar-
ing and Loading" section of this manual.
6.
Refer to "Wash Cycle" section in Operating the
Dishwasher section of this manual.
17