Bosch SBV65E00 Instruction Manual - Page 39

Browse online or download pdf Instruction Manual for Dishwasher Bosch SBV65E00. Bosch SBV65E00 42 pages.

Print Page

Electrical connection

Connect the appliance to an

alternating current only, ranging from

220 V to 240 V and 50 Hz or 60 Hz

via a correctly installed socket with

protective earth conductor. See

rating plate for required fusing 9:.

The socket must be near

the appliance and freely accessible

following installation.

If the plug is not freely accessible, an

allpole disconnector with a contact

opening of at least 3 mm must be

fitted on the installation side

to satisfy the relevant safety

instructions.

The connection may be modified by

technicians only.

A power cord extension may be

purchased from customer service

only.

Use only a residual current operated

circuit-breaker which features

the symbol ‚. Only this extension

guarantees compliance with

the currently valid regulations.

The appliance features a water

damage protection system. Please

note the system will not function

unless the power supply

is connected.

Installation and connection

Also observe

the sequence of worksteps here.

1. Disconnect the appliance from

the power supply.

2. Turn off the water supply.

3. Undo the waste water and drinking

water connection.

4. Loosen fastening screws for

the furniture parts.

5. If fitted, remove the base panel.

6. Pull out the appliance, carefully

pulling the hose behind.