Bosch SBV69T00AU/44 Operating Instructions Manual - Page 20
Browse online or download pdf Operating Instructions Manual for Dishwasher Bosch SBV69T00AU/44. Bosch SBV69T00AU/44 26 pages.
Print Page
aus
– Filter in the water supply blocked.
– Switch off the appliance and pull
out the mains plug.
– Turn off the tap.
– Clean filter in the supply hose.
– Reconnect power supply.
– Turn on the tap.
– Switch on the appliance.
– Water is left in the appliance
at the end of the programme.
– ( :
) Waste water hose
is blocked or kinked.
Filters blocked.
– ( :
) Waste water pump blocked,
cover on the waste water pump
is not locked in position
(see Waste water pump).
– Filters blocked.
– The programme has not yet ended.
Wait until programme ends (digital
display indicates :
implement the "Reset" function.
Error code :
– Filters 1R are soiled or blocked.
Refill indicator for rinse aid H is not lit.
– Refill indicator switched off.
– Adequate rinse aid available.
... during the wash cycle
Unusual foam formation.
– Handwash liquid in the rinse aid
dispenser.
Spilled rinse aid causes excessive
frothing, therefore please remove with
a cloth.
Appliance stops during the wash cycle.
– Power supply interrupted.
– Water supply interrupted.
20
Filling valves making striking noises
– Caused by the installation of the water
Knocking/rattling noise during rinsing
– Spray arm is striking utensils.
– Utensils not arranged correctly.
... on the utensils
Food residue on the utensils.
– Utensils placed too closely together,
– Too little detergent.
– Rinse programme too weak.
– Spray arm rotation obstructed.
– Spray arm nozzles blocked.
– Filters blocked.
– Filters incorrectly inserted.
– Waste water pump blocked.
– Top basket on right and left not set to
Tea or lipstick residue is not completely
removed.
– The detergent has an inadequate
– Too low rinsing temperature.
– Too little/unsuitable detergent.
Dull, discoloured glasses, film cannot be
washed off.
) or
– Unsuitable detergent.
– Glasses not dishwasher-proof.
Streaks on glasses and cutlery, glasses
have metallic appearance.
– Too much rinse aid.
Plastic parts discoloured.
– Too little/unsuitable detergent.
– Too weak programme selected.
Utensils not dry.
– Appliance door opened too early and
– Programme selected without drying.
– Too little rinse aid.
line and has no effect on the function
of the machine. Remedial action is not
possible.
utensils basket overfilled.
same height.
bleaching effect.
utensils taken out too early.