DRAGONFIRE 01-1910 Manual - Page 2

Browse online or download pdf Manual for Automobile Accessories DRAGONFIRE 01-1910. DRAGONFIRE 01-1910 2 pages. Rear bumper for rzr 900

Print Page

Step 6:

Repeat Step 5 for Passenger side.

Step 7:

With both upper brackets installed, place the bumper on the vehicle with the upper struts aligned with the holes. (Figure E)

Note:

This step may require assistance from an additional person.

Step 8:

Install supplied 10mm bolts and washers onto lower bumper mount, leaving loose for adjustment later. (Figure F)

Step 9:

Align the upper mount brackets with the upper struts and install supplied 3/8" hardware. (Figure G) Leave loose for adjustment later.

Step 10:

Align bumper with vehicle tail lights and tighten all hardware to the specifications in the table below.

Step 11:

This completes installation. Time to ride and enjoy!

ProTip: Periodically check all hardware and re-tighten if needed.

SIZE

5/16"

3/8"

10mm

For further assistance, please contact your authorized DragonFire dealer.

Torque

12 ft-lbs. (144 in-lbs.)

30 ft-lbs.

DragonFire