AirStage ARXB14GALH Installation Manual - Page 3

Browse online or download pdf Installation Manual for Air Conditioner AirStage ARXB14GALH. AirStage ARXB14GALH 19 pages. Indoor unit (duct type)

Print Page

2.3. Accessories

For installation purposes, be sure to use the parts supplied by the manufacturer or
other prescribed parts.
The use of non-prescribed parts can cause serious accidents such as the unit to fall,
water leakage, electric shock, or fi re.
The following installation parts are furnished. Use them as required.
Keep the Installation Manual in a safe place and do not discard any other accessories
until the installation work has been completed.
Do not discard any accessories needed for installation until the installation work has been
completed.
Name and Shape
Q'ty
Operating Manual
1
Installation Manual
1
Installation template
1
Hanger
4
Tapping screw
(M4 × 10mm)
8
Special nut A
(Large flange)
4
Special nut B
(Small flange)
4
Coupler heat insulation
(Large)
1
Coupler heat
insulation
(Small)
1
WARNING
Application
(This book)
For positioning the indoor unit
For suspending the indoor unit
For installing the hanger
For suspending the indoor unit from
ceiling
For suspending the indoor unit from
ceiling
For fixing the indoor unit on the floor.
For indoor side pipe joint (Large pipe)
For indoor side pipe joint (Small pipe)
Name and Shape
Q'ty
Cable tie (Medium)
2
Cable tie (Large)
4
Filter
2
(AR07/09)
3
(AR12/14/18)
Wire
1
2
1
3
4
5
Insulation
2
(Outlet)
(Small)
2
(Large)
Drain hose
1
Hose band
1
Drain hose insulation B
1
One touch bushing
1

2.4. Optional parts

The following options are available.
Description
Model No.
External output wire
9379529013
External input wire D
9368779016
External input wire F
9368779023
External input wire B
9368778002
External input wire E
9368778019
Remote sensor
UTD-RS100
IR receiver unit
UTB-*WC
Drain pump unit
UTZ-PX1BBA
When installing, please refer to the installation manual of each optional part.
Application
For transmission and remote controller
cable binding.
For fixing the coupler heat insulation.
Use for static pressure under 25 Pa.
For outlet flange
For installing drain pipe
VP25 (O.D.32, I.D.25)
For installing drain hose
Insulates the drain hose
This is used when attaching optional
items.
Application
For output port
For control input port
(Apply voltage terminal)
For control input port
(Dry contact terminal)
For forced thermostat off port
(Apply voltage terminal)
For forced thermostat off port
(Dry contact terminal)
Room temperature sensor
For the wireless remote controller.
En-2