Electrolux WTM3000 Installation Manual - Page 8
Browse online or download pdf Installation Manual for Refrigerator Electrolux WTM3000. Electrolux WTM3000 16 pages. Ik007 integration kit refrigeration
Also for Electrolux WTM3000: Installation Manual (16 pages)
Print Page
- 1. Table of Contents
- 2. Before You Call
- 3. General Warnings
- 4. Refrigerator Integration Kit Items
- 5. Cupboard Dimensions
- 6. Installation of 120˚ Hinge
- 7. Preparation
- 8. Attaching Top Hinge Bracket
- 9. Attaching Slide-Housing to Refrigerator Doors
- 10. Placing Refrigerator in Cupboard
- 11. Refrigerator Alignment
- 12. Attaching Slide-Bar to Cupboard Door
8
CuPBoaRd dIMEnSIonS
When positioned in a corner the clearance of dim g on the
hinge side of the cabinet will allow the doors to be opened
enough to enable the removal of the crisper bins.
Dim C
NOTE: Use the 120° hinges supplied with the kit to attach the
cupboard door to the cupboard.
Attach the hinge to the door to ensure that door can have
maximum opening, i.e. the door edge should not hit the
cabinet when the door is fully open.
Cabinet construction
(top mount cupbord shown below)
120° hinge
screw
mounting plate
NOTE: If Dim D is bigger than 1000mm in height, 3 hinges
are required to attach the cupboard door to the cupboard.
If Dim D is smaller than 1000mm in height, 2 hinges are
required/sufficient.
Dim G
120°
120° hinge
screw
5mm gap
between doors
mounting plate
screws
InSTallaTIon oF 120˚ hIngE
Please follow the instructions below to install the
120º hinge.
120° hinge
attach mounting plate with 120º hinge and tighten
the screw.
120° hinge
screw
mounting plate
mounting plate
use screws provided with the hinge to attach the
cupboard door to the cupboard.
Dim I
screws
use 120º hinge to attach the cupboard door to the cabinet.
Dim D
120° hinge
mounting plate
cabinet
cupboard door
37mm
This dimension is typically 37mm
(from centre line of mounting plate
to the cupboard cabinet edge)
screws