Electrolux 63K906 User Manual - Page 5

Browse online or download pdf User Manual for Oven Electrolux 63K906. Electrolux 63K906 15 pages. Built - in cooking appliances

Print Page

1. Oven Dimensions

using your oven

Separate Grill

The "grill" directs radiant heat from the powerful upper

elements onto the food. You can use the "grill" function for

tender cuts of meat, steak, chops, sausages, fish, cheese

toasties and other quick cooking foods. Grill with the oven

door open. Preheat your grill for 3 minutes to get the best

results. This will help seal in the natural juices of steak, chops

etc. for a better flavour. The grill dish is to be positioned

between the upper pair of support rails.

Cooling/Venting fan

Your built-in appliance is fitted with a cooling fan. It will

operate whenever you are using your oven or grill and will

blow warm air across the top of the oven door. In some

appliances the cooling fan may continue to operate after

the appliance is turned off. This is to cool the product.

Condensation

Excess condensation may fog the oven door. This may

happen when you are cooking large quantities of food

from a cold start. You can minimize condensation by:

• K eeping the amount of water used whilst cooking

to a minimum.

• M aking sure that the oven door is firmly closed.

• B aking custard in a baking dish that is slightly smaller

than the water container.

• C ooking casseroles with the lid on.

Note: If you are using water in cooking, this will turn

to steam and may condense outside your appliance.

this is not a problem or fault with your oven.

operating your oven temperature selector

A thermostat controls the temperature in your appliance.

The temperature can be selected within the specified range.

To set the temperature, turn the temperature selector in a

clockwise direction to the desired setting. An indicator light

above the temperature selector will come on. When the

temperature is reached, the heating source switches itself off

and the indicator light goes out. When the oven temperature

falls below the desired setting, the heating source switches

on and the indicator light comes on again. Once the food

is cooked, turn the temperature selector back in an anti-

clockwise direction. Do not force it right round in a clockwise

direction as this will result in damage to the thermostat.

8 USING YOUR OVEN Built-in Cooking

Note: For multifunction ovens the desired cooking function

must be selected before the oven will operate. once the

desired function has been selected, use the temperature

selector to set the required temperature.

Pre-heating your appliance

Pre-heating your oven is recommended in cooking and

grilling functions. For best results when baking you must

preheat your oven for 30 minutes.

With "Fan Forced"

1. It is recommended to preheat your appliance when

cooking or baking.

2. Set the desired temperature, by rotating your oven

temperature selector.

When the indicator light above the temperature selector goes

out, the oven has reached the desired temperature, place your

food into the oven, close the door and set the timer if you desire.

With "grill"

Preheat the grill for at least 3 minutes to obtain best results.

This will help to seal the natural juices of steak, chops and

other meats for a better flavour.

Setting temperatures

The following table displays the temperature settings

for recipes which do not show actual temperatures.

oven

temperature

º C

º f

Cool

175

Low Heat

Very slow

100 – 110

210 – 230

Slow

130 – 140

265 – 285

Moderate

Moderately slow 150 – 160

300 – 320

Heat

Moderate

170 – 180

340 – 355

High Heat

Moderately hot 190 – 200

375 – 390

Hot

200 – 210

390 – 410

Very hot

220 – 230

430 – 450

Extremely hot

240 – 250

465 – 480

operating the

programmable clock

3 button programmable timer

General features

Your 3 button programmable timer has the following features:

• T imer – your 3 button programmable timer allows you

to set a countdown time that will beep when the set time

has elapsed.

• C ooking duration – You can set a cooking duration.

A timer will count down the preset cooking time, beep

when the time has elapsed and turn the oven off.

• E nd cooking time – you can set a cooking finish time.

A timer will count down the preset cooking time, beep when

the finish time has been reached and turn the oven off.

• D elayed start cooking time – You can combine the

cooking time and stop cooking time to switch the oven

on and off at a specific time during the day.

Note: Your 3 button programmable timer only operates

with your main oven.

Setting the time of day

You must set the time of day before you can operate your

appliance. When power is supplied to your oven "12.00"

will be displayed and the "clock" indicator will flash.

1. T o set the time of day in hours and minutes, press the – or

+ buttons. 5 seconds after the last change, the "clock"

indicator will disappear, confirming the time has been set.

Note: the clock has a 24-hour display.

Setting the timer

1. Press the "mode" button until the "timer" indicator

begins flashing.

2. S et the countdown time you want by using the – and +

buttons. 5 seconds after the last change the "timer" indicator

will stop flashing, confirming the timer has been set.

3. To stop the beeper, press any button.

Setting the cooking duration

1. Check the clock displays the correct time of day.

2. Select the desired oven function and temperature. The oven

indicator light will glow and the heating source will come on.

3. Press the "mode" button until the "cook time" indicator

begins flashing.

4. S et the cooking duration you want by using the – or +

buttons. 5 seconds after the last change, the "cook time"

indicator will stop flashing, and the time of day will

be displayed.

Note: Do not forget to add preheating time if necessary.

Setting the cooking end time

1. Check the clock displays the correct time of day.

2. Select the desired oven function and temperature. The

oven indicator light will glow and the heating source will

come on.

3. Press the "mode" button until the "end time" indicator

begins flashing.

4. Enter the time of day you want to finish cooking by

pressing the – or + buttons. 5 seconds after the last

change, the "end time" indicator will stop flashing

and the current time of day will be displayed.

Setting the delayed start cooking time

1. Program the "cook time" and "end time" as described

in the relevant sections. Once both the "cook time" and

"end time" have been set, the "cook time" and "end time"

indicators will stop flashing and the current time of day

will be displayed.

To check or cancel settings

1. To check your settings, press the mode button until the

setting you want is displayed. A red light will flash next

to the mode (cook time, end time etc) that is currently

on display.

2. To cancel "delayed start" press the mode button until

a light flashes next to "end time". Press and hold the –

button until the clock no longer reverses (you will hear a

beep). If you have left the temperature and function knobs

at a setting the oven will start once the "end time" light

stops flashing.

3. To cancel "auto shut off" press the mode button until

a light flashes next to "cook time". Press and hold the

– button until the clock no longer reverses at ("0:00"

and you will hear a beep). This automatically cancels

"delayed start". If you have left the temperature and

function knobs at a setting, the oven will start once

the "cook time" light stops flashing. Because you have

cancelled "auto off" the oven will continue to heat until

you manually turn it off.

On completion of cooking

The oven will turn off, the timer will beep and the "end time"

and/or "cook time" indicators will flash.

1. Turn the function and temperature controls to the off position.

2. Press any button to stop the timer from beeping.

Built-in Cooking OPERATING THE PROGRAMMABLE CLOCK 9