DRAKE SCT4860 Instruction Manual - Page 3

Browse online or download pdf Instruction Manual for Modulator DRAKE SCT4860. DRAKE SCT4860 15 pages. Transcoder system

Print Page

1. Read Instructions—All the safety and operating instructions should be read

before the product is operated.

2. Retain Instructions—The safety and operating instructions should be

retained for future reference.

3. Heed Warnings—All warnings on the product and in the operating

instructions should be adhered to.

4. Follow Instructions—All operating and use instructions should be followed.

5. Cleaning—Unplug this product from the wall outlet before cleaning. Do not

use liquid cleaners or aerosol cleansers. Use a damp cloth for cleaning.

6. Attachments—Do not use attachments that are not recommended by the

product manufacturer as they may cause hazards.

7. Water and Moisture—Do not use this product near water—for example,

near a bathtub, wash bowl, kitchen sink or laundry tub; in a wet basement;

or near a swimming pool; and the like.

8. Accessories—Do not place this product on an unstable cart, stand, tripod,

bracket, or table. The product may fall, causing serious injury to a child or adult,

and serious damage to the product. Use only with a cart, stand, tripod, bracket,

or table recommended by the manufacturer, or sold with the product. Any

mounting of the product should follow the manufacturer's instructions, and

should use a mounting accessory recommended by the manufacturer.

9. A product and cart combination should be moved with care. Quick stops,

excessive force, and uneven surfaces may cause the product and cart

combination to overturn.

10. Ventilation—Slots and openings in the cabinet are provided for ventilation

and to ensure reliable operation of the product and to protect it from

overheating, and these openings must not be blocked or covered. The

openings should never be blocked by placing the product on a bed, sofa, rug,

or similar surface. This product should not be placed in a built-in installation

such as bookcase or rack unless proper ventilation is provided or the

manufacturer's instructions have been adhered to.

11. Power Sources—This product should be operated only from the type of

power source indicated on the marking label. If you are not sure of the type of

power supplied to your home, consult your product dealer or local power

company. For products intended to operate from battery power, or other

sources, refer to the operating instructions.

12. Grounding or Polarization—This product may be equipped with a

polarized alternating-current line plug (a plug having one blade wider than the

other). This plug will fit into the power outlet only one way. This is a safety

feature. If you are unable to insert the plug fully into the outlet, try reversing

the plug. If the plug should still fail to fit, contact your electrician to replace

your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

Alternate Warnings—If this product is equipped with a three-wire grounding-

type plug, a plug having a third (grounding) pin, the plug will only fit into a

grounding-type power outlet. This is a safety feature. If you are unable to insert

the plug into the outlet, contact your electrician to replace your obsolete outlet.

Do not defeat the safety purpose of the grounding-type plug.

12 a. Mise à la terre ou Polarisation—Cet appareil est équipé avec un cordon

d'alimentation à trois fils. Il est a brancher sur une prise ayant un connecteur a

la terre. Assurez-vous que la connection a la terre ne manque pas.

13. Power-Cord Protection—Power-supply cords should be routed so that

they are not likely to be walked on or pinched by items placed upon or against

them, paying particular attention to cords at plugs, convenience receptacles,

and the point where they exit from the product.

NOTE TO CATV SYSTEM INSTALLERS:

THIS REMINDER IS PROVIDED TO CALL THE

CATV SYSTEM INSTALLER'S ATTENTION TO

ARTICLE 820 - 40 OF THE NEC THAT

PROVIDES GUIDELINES FOR PROPER

GROUNDING AND, IN PARTICULAR,

FIES THAT THE CABLE GROUND SHALL BE

CONNECTED TO THE

GROUNDING

SYSTEM OF THE BUILDING, AS CLOSE TO

THE POINT OF CABLE ENTRY AS PRACTI-

CAL.

Important Safety Instructions

Example of antenna grounding as per National Electrical Code, ANSI/NFPA 70

SPECI-

ELECTRIC

SERVICE

EQUIPMENT

NEC -

NATIONAL ELECTRIC CODE

14. Outdoor Antenna Grounding—If an outside antenna or cable system is

connected to the product, be sure the antenna or cable system is grounded so

as to provide some protection against voltage surges and built-up static

charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides

information with regard to proper grounding of the mast and supporting

structure, grounding of the lead-in wire to an antenna discharge unit, size of

grounding conductors, location of antenna-discharge unit, connection to

grounding electrodes, and requirements for the grounding electrode.

See Figure A.

15. Lightning—For added protection for this product during a lightning storm,

or when it is left unattended and unused for long periods of time, unplug it from

the wall outlet and disconnect the antenna or cable system. This will prevent

damage to the product due to lightning and power-line surges.

16. Power Lines—An outside antenna system should not be located in the

vicinity of overhead power lines, other electric light or power circuits, where it

can fall into such power lines or circuits. When installing an outside antenna

system, extreme care should be taken to keep from touching such power lines

or circuits as contact with them may be fatal.

17. Overloading—Do not overload wall outlets, extension cords, or integral

convenience receptacles as this can result in a risk of fire or electric shock.

18. Object and Liquid Entry—Never push objects of any kind into this product

through openings as they may touch dangerous voltage points or short-out

parts that could result in a fire or electric shock. Never spill liquid of any kind

on the product.

19. Servicing—Do not attempt to service this product yourself as opening

or removing covers may expose you to dangerous voltage or other hazards.

Refer all servicing to qualified service personnel.

20. Damage Requiring Service—Unplug this product from the wall outlet and

refer servicing to qualified service personnel under the following conditions:

a. When the power-supply cord or plug is damaged,

b. If liquid has been spilled, or objects have fallen into the product,

c. If the product has been exposed to rain or water,

d. If the product does not operate normally by following the operating

instructions. Adjust only those controls that are covered by the operating

instructions as an improper adjustment of other controls may result in damage

and will often require extensive work by a qualified technician to restore the

product to its normal operation,

e. If the product has been dropped or damaged in any way, and

f. When the product exhibits a distinct change in performance—this indicates

a need for service.

21. Replacement Parts—When replacement parts are required, be sure the

service technician has used replacement parts specified by the manufacturer

or have the same characteristics as the original part. Unauthorized substitutes

may result in fire, electric shock or other hazards.

22. Safety Check—Upon completion of any service or repairs to this product,

ask the service technician to perform safety checks to determine that the

product is in proper operating condition.

23. Wall or Ceiling Mounting—The product should be mounted to a wall or

ceiling only as recommended by the manufacturer.

24. Heat—The product should be situated away from heat sources such as

radiators, heat registers, stoves, or other products (including amplifiers) that

produce heat.

Figure A

GROUND CLAMP

ANTENNA

LEAD IN

WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)