Bosch 2 Manual For Installation And Utilisation - Page 10

Browse online or download pdf Manual For Installation And Utilisation for Washer Bosch 2. Bosch 2 18 pages. Mini blender
Also for Bosch 2: Quick Installation Manual (16 pages), Original Instructions Manual (13 pages), Original Instructions Manual (22 pages), Instruction Manual (32 pages), User Manual (28 pages), User Manual And Installation Instructions (16 pages), Instruction Manual (42 pages), Operating Instructions Manual (8 pages), Instruction Manual (8 pages), Instruction Manual (12 pages), Quick Start Manual (2 pages), Quick Start Manual (9 pages), Instruction Manual And Installation Instructions (36 pages), User Manual And Installation Instructions (48 pages), Operating Instructions Manual (26 pages), Quick Reference Manual (2 pages), User Manual And Installation Instructions (24 pages), Instruction Manual (42 pages), Information For Use (28 pages), User Manual (40 pages), User Manual And Installation Instructions (35 pages), User Manual (24 pages)

Print Page
Bosch 2 Manual For Installation And Utilisation
BTEXACT_bu_3609929A44_t.fm Seite 9 Dienstag, 6. September 2005 3:51 15
Voltage adapter
Article number 0 602 490 ...
Voltage
Cable length
Weight in accordance with
EPTA-Procedure 01/2003
Angled drive heads
Article number 0 607 ...
Weight in accordance with
EPTA-Procedure 01/2003
Screw head
Article number 0 607 ...
Weight in accordance with
EPTA-Procedure 01/2003

Operating and Storage Environment

The device is suitable exclusively for op-
eration at enclosed work sites. For trou-
ble-free operation of the device, the al-
lowed ambient temperature should lie
between –5 °C and +50 °C (23 °F and
122 °F) at an allowed relative humidity of between 20
and 95 %, free of dew.
Mounting of a Screw Head
Type 0 602 491 647/... 650/... 651/... 652/
... 656/... 669/... 671/... 673/
... 675
6
5
4
3
Hold the machine with the open-ended spanner 6 on
the spanner flats 5 of the angled head flange.
Never clamp the machine on the housing shells.
3 609 929 A44 • (05.09) T
V
m
kg
lbs
s 1/4"
s 3/8"
... 453 617 ... 453 620 ... 451 618 ... 453 618
kg
0.20
lbs
0.44
QC
1/4"
... 453 631
kg
0.20
lbs
0.44
4 MOUNTING
Place the angled drive head 3 in the desired position
on the flange and screw on with the open-ended
spanner 4 on the spanner flats 16 of the sleeve nut.
Hold the angled head flange with the open-ended
spanner 6 to prevent turning.
Suspension Device
Type 0 602 491 647/... 650/... 651/... 652/
With the hanging hoop 8, the machine can be at-
tached to a suspension device.
Place the hanging hoop 8 included as an accessory
16
on the machine and allow it to engage in the slots 14.
Regularly check the condition of the hanging hoop
and the hook of the suspension device.
English–9
9.6 V
12.0 V
... 503
... 504
9.6
12.0
5
5
0.15
0.15
0.33
0.33
s 3/8"
1/4"
0.20
0.30
0.20
0.44
0.66
0.44
... 656/... 669/... 671/... 673/
... 675
8
14
14.4 V
... 505
14.4
5
0.15
0.33
QC
1/4"
... 453 630
0.20
0.44