Bosch Axxis+ WFR 2450 Operating, Care And Installation Instructions Manual - Page 36

Browse online or download pdf Operating, Care And Installation Instructions Manual for Washer Bosch Axxis+ WFR 2450. Bosch Axxis+ WFR 2450 49 pages. Bosch washing machine operating, care and installation instructions wfr 2450, wfr 2460
Also for Bosch Axxis+ WFR 2450: Operating & Installation Instructions Manual (49 pages), Operating & Installation Instructions Manual (49 pages)

Bosch Axxis+ WFR 2450 Operating, Care And Installation Instructions Manual
Fault
Possible cause
Control lights do not
A fuse has triggered.
shines.
hi
Power failure.
Appliance is in energy saving mode.
This is not a fault.
Program does not
Start/Pause button not pressed.
start. Start/Pause
indicator light
flashes.
Program does not
Loading door not closed properly.
start.
start.
Door open?"
indicated in the
display field.
Press start" is
End time selected but still not activated by pressing
indicated in the
the Start/Pause" button.
display field.
Program does not
End time selected and activated.
start. Time delay" is
indicated in the
display field.
Clock cannot be set. Program has already started; when a program has
started, the clock cannot be set.
Set clock:" text
The setting has switched from hours to minutes;
remains in the
both selection points have the same text.
display field even
though the Menu
button has been
pressed.
--:--" is
Clock not set.
displayed instead of
the end time in the
display field.
Clock not set.
End time cannot be
selected.
l t d
Program has already started; when a program has
started, the end time can no longer be selected.
36
Action
Switch on/replace the fuse.
Call Customer Service if this fault is repeated.
An interrupted program will be resumed when power
returns. If the laundry is to be removed during
a power failure, proceed as described under
Emergency lock release"; see Page 29.
Press the Select button; energy saving mode is
terminated.
Press the Start/Pause button.
Check whether laundry is trapped in door.
Close the loading door (a click should be heard).
Program continues.
Press the Start/Pause button.
None. Appliance starts automatically.
Wait until program ends.
None.
Set clock; see Page 24.
Set clock; see Page 24.
Reselect program; see Page 26. Before starting the
program, select and start the desired end time; see
Page 19.