Bosch Electronic Operating Instructions And Installation - Page 5

Browse online or download pdf Operating Instructions And Installation for Washer Bosch Electronic. Bosch Electronic 25 pages.

Print Page

Removing the transport securing devices

Remove all the transport securing devices from the back of

the machine before starting the appliance for the first time.

Use the spanner supplied only if a suitable ring spanner is not

available.

Caution. Risk of injury through slipping.

m Loosen and remove the 4 fastening bolts «A», the tie bar and

the seal.

m Next remove the four spacers «B» which will have fallen to

the floor. Gently tilt the appliance forward.

m Fit the protective covers «C» which are in the bag

accompanying the appliance documentation.

Keep the transport securing devices in case you need to

move the appliance in future.

The appliance should only be moved with the transport securing

devices in place. To fit them, remove the back panel «D» from

the appliance and carry out the operations given above in reverse

order.

When installing the appliance and connecting the water and

electricity supplies, the following should all be to hand: safety

instructions, warnings, general advice and information, and

standards or requirements from water and electricity

suppliers.

Take care when lifting the appliance. Risk of injury.

Do not lift the appliance by the controls or protruding

components.

If you are in any doubt, commission a qualified person to

connect the appliance to the water and electricity supplies.

All appliances are rigorously tested at the factory under normal

working conditions. The appliance or the outlet hose may still be

damp or contain residual water as a result of these tests.