Bosch FAP-OC 500Series Product Information - Page 19

Print Page

Product Information 500 Series LSN Fire Detectors (EU)

5.2. Detector Base / Detector Base with Relay

The base housings (Fig. 7.: Side view of

base) are made of white polycarbonate.

The screw terminals (for cables with cross sec-

tion from 0.3 mm

cure electrical connection through the clamped

contacts when mounting the detector.

The bases are provided with three mounts

for cable ties.

. These can be used for fastening the base during the wiring−up.

Detector bases with relay (FAA−500−R und FAA−500−R−GB) can

only be used in combination with the modular fire panel series 5000.

In cases where relay bases are used, no external detector alarm

display can be connected.

Connecting the base

D Wire up the LSN base according to the labeling in the outer ring (see Fig. 8.,

Pos. 3).

Fig. 8.: Plan view base

Pos. Description

Connection terminals

Mount for cable ties

Labeling on LSN connec-

tions

Fastening slot

to 3.3 mm

) guarantee a se-

Page 19

PI − 34.70 en

146 mm

BDL−F.01U.025.876

A5.en/ 02.02.2006

ST−FIR/PRM1 / zab